Search Archive

How do you take it back out?

By Mark L. Warner · Oct 19, 2006in Hacks/Mods💬 10 posts👁️ 1,911 views
Posted Oct 19, 2006 · 00:03 UTC#1
I have an AVIC Z1 installed (by a shop) in my '04 VW Touareg. The shop has been completely useless (and obnoxious) in terms of helping me with the bypass procedure from Simmentech. I am going to have to do it myself. But I need some step by step help in terms of getting it back out without destroying my dash. Once it is out, I'm pretty sure I can handle the wiring. I couldn't find a removal tool in the box it came in, so if it came with one then the shop still has it. Any tips?
Posted Oct 19, 2006 · 00:41 UTC#2
If someone can't give you instructions on how to take your dash apart (very doubtful), call the shop up again and ask them if they can just do you a favor and remove the dash panel.

If they won't, ask them how to do it, and if they won't tell you that, then you just have a crappy shop. :shock:
Posted Oct 19, 2006 · 01:25 UTC#3
I would go to crutchfield and get the mastersheet for your vehicle. That will walk you through the process.
Posted Oct 19, 2006 · 01:46 UTC#4
howarmat said:
I would go to crutchfield and get the mastersheet for your vehicle. That will walk you through the process.


Yeah, great idea!

Buy the sheet from Crutchfield for $5.
They are VERY detailed and explained step by step.
Posted Oct 19, 2006 · 02:48 UTC#5
Great idea but no Mastersheet for '04 Touareg. any other ideas? Does Pioneer have such a sheet?
Posted Oct 19, 2006 · 02:55 UTC#6
no pioneer won't have information like that. Can you take a picture of the z1 installed in your truck? The factory radio comes out with special keys. Odds are the shop that did the install may have used a cage to mount it. Might be able to help you out if you can get me a pic of the z1 installed.
Posted Oct 19, 2006 · 15:09 UTC#7
OK here is a pic of the install. Any help would be greatly appreciated. Thanks.

User image
Posted Oct 19, 2006 · 20:17 UTC#8
Ok from what I can see there you can try this. The piece that surrounds the z1 is just a plastic trim that comes with it. You can try pulling the piece I circled off. They might have glued it down so be carefull.

Once that's off, if they did use a cage, you'll probably see 4 small phillips head screws on each side. You'll need a jewelers screwdriver to get those out. Once those are out you should be able to slide the z1 out.

User image
Posted Oct 20, 2006 · 00:16 UTC#9
Thanks for your input my friend. I will try that - hopefully over the weekend. so how's the weather up there? I used to live/work up that way. Lived in Princeton and worked partly in Piscataway and partly in Manhattan. Moved to Bimingham, AL about 14 1/2 years ago and moved to Tuscaloosa AL (where the University of Alabama is) about 6 years ago and I love it down here! Still have alot of family in NY, NJ, and PA.

Thanks again for the help, I will post again once I try to get it out.
Posted Oct 20, 2006 · 00:59 UTC#10
Which way is Piscataway? That a way! (sorry couldnt resist :) )