Hi, Everyone

I had installed AVIC D3 to 2001 BMW 330CI the other day. I used a best buy harness which suppose to fit to factory harness. well, the nav worked and voice came out. Radio worked great, BUT, BUT CD didn't put out any sound at all. I mean, it is playing since I could see in the display but no sound at all. did anyone faced any probelm like this at all? I do listen to alot of CD since i don't have Ipod and this is killing me. Please help.. Thank you for reading.

Dan

Plus, does anyone have a correct wiring diagram for 2001 BMW 3 series? I think I am having probelm with wiring...

Please let me know Thank you

disconnect the blue wire from the pioneer to the 3rd party harness and connect it (3rd party harness) to the blue/white on the pioneer

check your blue wire on the bmw/vw harness. its your amp turn on, if you dont have it hooked up to blue white off the radio, then connect it either to that or to your acc(red). that should fix your problem.i am an installer for best buy, and we hear this problem all the time.

sounds like the amp turn on wire to me also, a lot of aftermarket harnesses use a blue wire for there amp turn on wire instead of a blue/white wire that they should have used.