unit freezes after phone call is ended. is this a common thing?

also i was reading somewhere that 2 wires on the harness are switched? is this true? any detailed info on this? i also did not ground any of the unused wires, should i?

when using the phone through the unit are the voices supposed to come out of my car speakers? im using the ndg500. thanks.

yes it does. unfortunately the best advice i can give you is to try and refrain from using the bluetooth when you are depending on the navigation unit to get you somewhere. as annoying as that sounds....

Eddie

thanks eddie.

now my problem is when i make a call i cant hear the phone ring or the person on the other line, but they can hear me fine. i guess this is a problem with my speakers? it no longer freezes though, which is good. i also do not get the navi updates through my speakers.

any ideas where the problem could be?

i know exactly what that is. it is your volume on the unit its self you have it too high. so your music is playing at a level of about twice the volume at wich your unit speaks/notifies/transmits call volume. basically music volume is too high on the unit. set it at about 13 or so and adjust it accordingly, you should be able to hear everything and your music just turn the volume in your car stereo up.

Eddie Rosado

eddie. how would i go about adjusting it?

the unit does mute my music, dont know if that matters.

wow sorry for not keeping up with this thread. but you should be able to just turn the knob and see volume units on the upper right side of the screen from 0-20.

Eddie