Hello everyone..
I am a installer that has been installing the new Z110bt for abit.. A customer told me that the parking brake warning screen always displays when he starts up his car.. even if the brake is off...I thought it might have been a bad connection..but Today I installed a Z110bt in another car and the same thing happened.. Is this feed back on the line or is there a problem with the new units.. can anyone tell me.. Thanks..
What are you connecting the green parking brake wire to in the vehicles?
Right to the "E" brake... and when I check the connection screen.. the parking break goes on and off when I pull it up and down...
my first few z installs the same thing happened. some cars fed back if tapped directly in. others dont. sometimes i cut the e brake wire in half use 2 diodes stripe facing brake wire in car one diode to z one diode to dash indicator. all better. jim
Well..
I installed another z110bt and did not even hook up the break wire.. and still.. The same mesage popped up on start up.. Wire in hand..lol... Today I will be calling my tec guy .. I will let you guys know what it is..
you need to diode isolate this wire. also warning will come up if not conn jim
Pioneer Tech support told me on the phone and walk me through the control panel the consul in the control panel says the brake light is connected properly and when you disengage the break and engage to break it does what it's supposed to do so why it's still indicating the brake light on the break wire is still improperly connected mystery of the century I'd really like to know why and how to get little warning saying it is chemically properly connected to the right terminal and wire to the right liarand furthermore this is connected to a Toyota four Runner 2003.
http://www.ncttora.com/fsm/2003/4runner ... ml?C=N;O=D.
Anyone he anyone having a Toyota four Runner 2003 here is the Bible the wiring and the as dramatic diagrams for this vehicle you have illumination problems or any other problem the wiring diagram is contained in the above link that I found on my research
Pioneer Tech support told me on the phone and walk me through the control panel the consul in the control panel says the brake light is connected properly and when you disengage the break and engage to break it does what it's supposed to do so why it's still indicating the brake light on the break wire is still improperly connected mystery of the century I'd really like to know why and how to get little warning saying it is chemically properly connected to the right terminal and wire to the right liarand furthermore this is connected to a Toyota four Runner 2003.
http://www.ncttora.com/fsm/2003/4runner ... ml?C=N;O=D.
Anyone he anyone having a Toyota four Runner 2003 here is the Bible the wiring and the as dramatic diagrams for this vehicle you have illumination problems or any other problem the wiring diagram is contained in the above link that I found on my research
You sound pretty foreign.. and aren't making allot of sense...
Have you considered the bypass? It works well.... very solid solution... and is pretty brain-less.....