Search Archive

Reverse Wire and VSS lead for 06 Honda Ridgeline

By oldandgrumpy · Dec 20, 2006in Problems/Troubleshooting💬 4 posts👁️ 5,595 views
Posted Dec 20, 2006 · 18:57 UTC#1

I've been reading through the forum, lots of information. Great site.

 

I just wanted to confirm the locations of the reverse and vss wires for my truck. Installing a D2 over the holidays.

 

Reverse Wire

reverse wire should be green, at the MICU (Multiplex Integrated Control Unit) should be part of the underdash fusebox

 

VSS Wire

itz blue/white at the PCM (pin 29)

 

If anyone could verify this for me I would appreciate it.

 

Also is this the correct picture and process I would use to bypass.

 

avic-d2_harness_bypass.jpg[/img]

Posted Dec 21, 2006 · 01:16 UTC#2

Yes that is the correct picture to ground your D2.

Posted Dec 21, 2006 · 02:43 UTC#3

2006 Honda Ridgeline

 

Reverse Light green + MICU

Notes: The MICU (Multiplex Integrated Control Unit) is part of the underdash fuse/relay box.

 

Speed Sense blue/white PCM, connector A, pin 29

Notes: The PCM (Powertrain Control Module) is behind the passenger side headlight.

 

If the stock radio has speedd controlled volume it'll also be in the radio harness a blue wire.

 

merry xmas

Posted Dec 26, 2006 · 14:36 UTC#4

Did that work? I was under the impression that the Ridgeline does not use a VSS feed. I thought that they were using shaft speed sensor and that you will have to get the signal from the ABS. I could be wrong though.