Has anyone installed 3.0x on the F500-BT? This one: 3.0 Sticky

I can easily get into testmode and copy the files over, but ver 3.o installation with the push/hold button sequence is not possible with no <eject> button.

I am copying the files to see if it will work with 2.0006, but believe I read that it will not.

This is a second unit, the first having Ver 4.0 with 20120 maps.

Thanks in advance.

Nope. Didn't work.

Hello

after months of researsh, finally I did update my F500BT US version from V2.06 to V3.0

Try to follow exactly this thread #381 http://avic411.com/index.php?/topic/27807-fx31-complete-firmware-image/page__st__375

the link from raoidshare.ru for WINCEIMG.BIN and WINCEIMG.CKS is not working

I upload the file on:

http://www.mediafire.com/?dem8wi4s7d5h6cu

http://www.filesonic.com/file/827534291/WINCEIMG_F500_6.5.0.6_for_3.02.rar

https://rapidshare.com/files/458834242/WINCEIMG_F500_6.5.0.6_for_3.02.rar

Goog luck

Hello

 

after months of researsh, finally I did update my F500BT US version from V2.06 to V3.0

 

Try to follow exactly this thread #381 http://avic411.com/i...e/page__st__375

 

the link from raoidshare.ru for WINCEIMG.BIN and WINCEIMG.CKS is not working

 

I upload the file on:

http://www.mediafire...dem8wi4s7d5h6cu

http://www.filesonic....6_for_3.02.rar

https://rapidshare.c....6_for_3.02.rar

 

Goog luck

Thanks so much!!!!!!!!!

Help!!!!

I followed the instructions to update WinCE version 2.0070000 to 3.0 (on my F500BT Europe) to install the update after 3.02 of pioneer europe:

During the upgrade to 3.0 gives an error (checksummed error) but finally says UPDATE OK, but after reboot the screen goes black and the LED flashes. I can not boot the system or TestMode ....

What can I do? Is posible go back to version CE2.07?