So far, I have the following:

Pioneer - Avic z130BT

Scosche - VO4152B - Mounting kit

Scosche - VOAB - Antenna Adapter

Scosche - VO03B - Wiring Harness

AXXESS - ASWC - Steering wheel control interface

CANM8 - NAVTONE - To restore the parking assist tone

I know my wiring is a pain, and replacing the factory HeadUnit drives the car crazy if you dont do it right, so I'm hoping someone can help with the VSS wire for Dead Reckoning as well as the CAN-HI and CAN-LO for restoring the parking sensor and steering wheel controls. Everything is still in the boxes, but its burning a hole in my brain looking for all the info.

Thanks

I'm going insane! Can anyone help me find the VSS and Illumination wires? my z130 is toooo bright at night and I'd love to have the dead reckoning working since in NY there are elevated subway tracks not to mention bridges and tunnels to go thru everywhere>

Thanks

I have the same car and am trying to install an AVIC X940BT but am having issues. I've installed in Volvo before but this one has got me stumped. Here's my issues:

1. Power is not switched. Unit turns on as soon as the wiring harness is plugged in regardless of ignition position.

2. No sound to speakers. I have the wiring harness matched up and have double checked.

3. Dont know where to connect the blue system remote wire, pink speed signal wire, orange illumination wire, or purple reverse signal wire.

4. Don't know what to connect the blue wire from the harness to?

Thanks for any help you can offer.

2007 Volvo XC70

Avic X940BT

Metra 70-9221 harness

Found out the Metra wiring harness I got was wired backwards!! Got the right one installed now but still don't know how to get the auto dimmer to work as the headlights on the Volvo are always on. Would also love to get the backup sensors working again too.