Hi Guys,
Just wondering if anyone has a "how to" for setting up an Avic 900bt at home so I can work on it out of my car. It was make everything must easier. I know this has been done but, I dont understand how its done.
Thanks,
Ben
See the AVIC Wiki for the "ATX Power" topic Jason copied out of the Hacks and Mods forums.
as licensed radio amateur i do have a couple 13.8v power supplies for my ham rigs i can use to power the avic when needed.
you will need a 12v power supply what can be a car battery or any 12v power supply what can deliver a couple amps as you won't connect any speakers to play music but just want to hack the avic.
use a couple probe leads with so called crocodile clips on it to hook them up to the power wires of the avic.
best to change the red / yellow wires on the avic power lead. this is well explained in the pioneer avic installation manual on chapter; Connecting the System, Connecting the power cord. in the eu pioneer avic-f710bt installation manual on page 10.
this will fire up the avic and the hacking can begin 