So I've been debating whether or not I wanted to post this or not for a while, and today I decided to. I searched for similar topics here and found a few where people point out that you have to change the settings so it takes the shortest route, the longest route, etc, but I really don't see how that applies to what seems like blatantly poor route planning and directions. Does anyone else have issues with their Z? And I mean the directions are down right completely wrong! In November I programmed in an address for Lake Zurich IL. While heading east on Lake Cook Road, it wanted me to go past Route 12 by a block, make a u-turn, then come back and make a left turn (instead of making a right turn onto 12 from the intersection I was at). Today I punched in an address for a dentist in Barrington IL. As I approached the building, it wanted me to turn left which would put me on the opposite side of a 6 lane road (instead of turning right and in their parking lot). Keep in mind these were both long established addresses, there was no construction, detours, etc to have to navigate around (and these are just two examples I have, there's been many more).
I have found a workaround to this, or at least what seems to be one: enter the city first, then the address. But since the address is the first entry point on the screen I don't see why the info needs to be entered backwards. I also have to believe I'm not the only one with this issue.
Mine is a Z110BT upgraded to a Z140BT thanks to the help of everyone on this forum...