So i hooked up the bypass correctly I believe and it shows parking brake on in the connections info but as soon as i start moving everything gets disabled. Any ideas what I may have done wrong. Followed the write up correctly from what I can tell. I have had the message appear about the parking brake not being hooked up correctly but it still disables all features when in motion. any help would be great.

No ideas?

How are the pins on the by pass done? I did mine the first time and used the wrong pictures and the second time it worked fine. Additionally, make sure the pin is getting a good connection as the friction of putting the connector together can make the pin on the plug back out.

I moved the mute pin over one like in the bypass. The pin is full seated in the connector and will not back out at all when pulled on. The only other thing I can think of is that the actual hole on the plug is opened too much because of the paper clip I used.