Search Archive

GPS Navigation Issue

By ptkdude · Jun 03, 2014in NEX Series💬 11 posts👁️ 2,087 views
Posted Jun 03, 2014 · 03:19 UTC#1

Hi all,

 

I installed the AVIC-6000NEX in my car a week ago and it worked fine until today.  I noticed this morning the GPS thinks I'm moving backwards.  I've reset the navigation options but am still having the same problem.  This was working correctly until today.

 

Anyone have ideas on what I should check?

 

Thanks!

 

 

Posted Jun 03, 2014 · 03:48 UTC#2

Reset button!

Posted Jun 04, 2014 · 14:19 UTC#3

Pressing the reset button got me halfway there:  instead of driving backwards, I was going sideways.  Pressing it again got it back to normal.  For one trip.  Now I'm going backwards again.  UGH! 

Posted Jun 05, 2014 · 16:20 UTC#4

Sorry to hear that.  Did you connect the VSS wire?  The reverse signal wire?

Posted Jun 05, 2014 · 19:55 UTC#5

I didn't connect either.  It seems to be working fine today, though.  I didn't buy the unit for navigation, though, so if it doesn't work that's fine.  I've always used turn by turn on my iPhone.

 

Any ideas on how to hook up the VSS without getting behind the instrument panel?

Posted Jun 05, 2014 · 20:16 UTC#6

I didn't connect either.  It seems to be working fine today, though.  I didn't buy the unit for navigation, though, so if it doesn't work that's fine.  I've always used turn by turn on my iPhone.

 

Any ideas on how to hook up the VSS without getting behind the instrument panel?

you have to get to the harness to get to the VSS wire from the radio. Now it depends on your vehicle wiring diagram for the location. If you vehicle had the OEM Navigation installed the VSS wire would be on the vehicles harness

Posted Jun 05, 2014 · 20:42 UTC#7

Thanks.  I'm looking through the factory service manual now.  

 

For the reverse wire, I can just run a line from either of the reverse lights in the tail assy., right?

Posted Jun 05, 2014 · 21:08 UTC#8

Yes connect it to your reverse light

Posted Jun 06, 2014 · 10:00 UTC#9

Yes connect it to your reverse light

Yup

Posted Jun 15, 2014 · 20:12 UTC#10

As a follow-up, I connected the reverse wire and the GPS problem "magically" disappeared!  It's been too hot to futz with finding the VSS yet, but I'll do that soon.

 

Thanks for the help on this!

Edited Jun 15, 2014 by ptkdude
Posted Jun 15, 2014 · 23:50 UTC#11

You could check you settings. There is a "Heading Up" and a "North Up" setting.

 

Heading Up always has the car icon going towards the top of the screen. North Up always has North at the top of the screen. So if you are traveling south, the car icon will be going toward the bottom of the screen.

 

The 3D setting is always a Heading Up setting.

 

Not sure if this is your problem or not.

Edited Jun 15, 2014 by philfrompa