Hi,

I've just upgraded from a D1 to a D3.

I used to have the XM radio kit from TURK (Adapter and XM direct) connected to my D1 without any problems. The adapter connected to the IPBUS port.

I know connect the XM kit the exact same way in my D3, and the XM option does not even light up. When I scroll throw my audio menu's i cannot chose the XM option (greyed out).

Can anyone assist me with this?

Terks work like crap with most Pioneer products. Buy the Pioneer GEXP920XM or GEXP10XMT (if you want XM navtraffic)

Thats not what i asked.

I dont want to buy another unit, and i dont care for Navtraffic.

I just want this system to work. It was working great!!

Anybody else?

Hi,

I've just upgraded from a D1 to a D3.

I used to have the XM radio kit from TURK (Adapter and XM direct) connected to my D1 without any problems. The adapter connected to the IPBUS port.

I know connect the XM kit the exact same way in my D3, and the XM option does not even light up. When I scroll throw my audio menu's i cannot chose the XM option (greyed out).

 

Can anyone assist me with this?

Sounds like you've got the TURK connected to turn on when the D3 turns on (Connected to the ACC wire rather than 100% on)... a way to fool the system into knowing the TURK is there (pain I know) but, with the ignition powered on, REMOVE the power plug from the D3, give it a minute... THEN re-insert your power plug or the D3... Life should be good

That will work forever?

My Turk IS plugged to the ACC.

Where should it be plugged too?

It will probably work forever.... (as long as your battery doesn't go flat on you)

Terk is the biggest piece of crap ever made. Well known to crap out on a moment

Terk is the biggest piece of crap ever made. Well known to crap out on a moment

Can't answer that one... yeah, I would defiitely go get yourself a P10XMT or whatever to listen to XM rather than anything else, will also make integration better as well