I ran a search and couldn't find anything on this. Maybe I didn't have the right word combo or whatever so if somebody could point me in the right direction I would appreciate it.

When I turn my truck off, the radio will just scan through my presets non stop. So when I turn my truck back on, it will be on a different preset. Why is it doing this? What is the purpose? Sounds petty I know but it is kind of a pain.

Thanks for your help. It is installed in a NBS 2007 Chevy 2500.

youve probly got steering wheel controls right? my guess is your interface is bad or needs reprogramed

i agree. sounds like a problem with the sterring wheel control interface, or even a power problem. have your installer check for good acc. power on the swi, good ground, and a good change in voltage on the control wire when you press a button on the steering wheel. you could even have him unplug the swi from the d3 to see if the problem goes away. if it does, bingo.

Make sure the power for the steering wheel control interface is tapped at the same place as the head unit's accessory wire. If the radio is powered up while the SWI-PS is not, this can happen.

That's the most common problem, also double-check your install and make sure you have cut the brown loop wire.

Wow, thanks for all the replies.

I do have the steering wheel control adapter. And that does make sense, because I could never get it programmed. It's like it was not seeing anything coming from the steering wheel buttons when we tried to program it.We left the next day after my install and I didn't have time to troubleshoot it, so I just bundled it up and tucked it under the dash for later. I will try to check it tonight.

Again, thank you guys very much for all the help, especially since I just noticed I posted it in the wrong section.

WOW! I`M HAVING THAT SAME PROBLEM

HEY HAWKEYE680 WHEN AND IFF U TAKE CARE OF UR SCANNING PRESET PROBLEM WOULD U MIND POSTING WHAT SOLVED THE PROBLEM

THANKS

THIS IS A PRETTY NEW INSTALL IN MY 2004 YUKON

HEY HAWKEYE680 WHEN AND IFF U TAKE CARE OF UR SCANNING PRESET PROBLEM WOULD U MIND POSTING WHAT SOLVED THE PROBLEM

THANKS

I will be glad to. Here is a crappy phone pic.

Just make sure the SWI-PS and the AVIC have the same accessory power tap.

I had the same exact problem with my pac steering wheel control until I programmed it... just program it correctly and you will get rid of the problem