Hello, 

 

I have an issue with an install Im not sure If im missing something. I have the AVH-X2700BS unit my main concern is with the reverse camera. 

 

The reverse camera comes with just a black and red wire so I wired the red into the Purple/White Reverse wire and the black in with the radio's ground. With the camera setting on "BATT". Now my main problem is that when initially turn on the unit and put the car in reverse it will go to camera mode, but when the car is put back in drive the camera view does not go away. it will just go to black, since the camera itself is no longer receiving signal.

 

Does anyone has information on how this should properly function or is this just how it is.