The included PAC wiring harness features the following hardwire connections.

                                                                     
c2R-FRD1*                                    Pioneer          
Wire Color 	Function                     Harness

Red      	+12 Volt Accessory---------->Red<-------------------Backup Camera Red pigtail
                                                      (other end connects to red camera wire)

Yellow   	+12 Volt Constant------------Yellow

                                                                 Micro
                                                                 Bypass

Black 	        Ground---------------------->Black<--------------Black---BLK(Camera GRD wire)
Blue      	Power Antenna---NC (No Ant)
Blue/White 	Amp Turn On ---------------->Blue/White<---------Blue
Orange/White 	Illumination-----------------Or/Wh
White   	Left Front Speaker +  -------WH
White/Black 	Left Front Speaker -  -------WH/Blk
Gray    	Right Front Speaker + -------Grey
Gray/Black   	Right Front Speaker - -------Grey/Blk
Green   	Left Rear Speaker +   -------Green
Green/Black 	Left Rear Speaker -   -------Green/Blk
Purple  	Right Rear Speaker +  -------Purple
Purple/Black 	Right Rear Speaker -  -------Purple/Blk
Green/White 	SWC Output------NC (No SWC)
Purple/White 	VSS-------------NC (No NAV)
Red/White 	Parking Brake---NC (bypass)  Lt Grn--------------Dk Grn
Light Green 	Reverse Trigger------------->V/WH (Or Wh/Ylw @ SJB-either/or)



*Provides navigation trigger wires and timed accessory output for replacing the factory radio. 
*Retains the factory installed amplified audio system.

Data controlled:

   -RAP accessory output wire
   -Reverse trigger wire
   -Illumination output wire
   -Parking brake wire
    Vehicle speed sense wire (not needed w/o NAV)