mikek753

hi,

No, I didn't find any solution.

It got better, but I think it's heat related and as weather now isn't as hot it works Ok

pls. post if you'll find anything.

thanks for the reply.

No, camera in my case isn't powered unless car is in "R" position. So there is no camera overheating issue.

please, take a look at my video that shows how 5sec power reset re enables HU camera input

https://www.youtube.com/watch?v=z6C19gX-8zU

hi,

when car is started and put in reverse backup camera displays video feed to HU just fine

however, after 20-40 min drive when I try to park and switch to reverse I got black screen with HU warning ... mirrored ...

if I turn off engine and wait for a min or two and turn car to ON or start engine I get video feed on HU just fine

I tried to disconnect backup camera when I got black screen (car with engine ON after parking against curb and switch in reverse position) and connect video camera / camcorder input to backup camera output and camcorder shows video just file. so, looks like backup camera works Ok and something within HU.

Originally I thought that it's backup camera and got another camera and even added voltage regulator as I thought camera might not take over 12V - so it isn't the case.

my connections:

backup camera takes power from backup lights

camera is connected over rca cable to HU

HU gets +12 from reverse light to reverse detection wire (I think it's magenta, has label for reverse)

HU is set for polarity as battery

How I can fix this annoying issue?

thanks

hi all,

I got MHL(black) from samsung.com that also comes with 5-11 pin

However, when MHL is connected to Samsung S3 GPS signal got cut and data is impacted as well.

Take a look how GPS test is impacted when MHL is connected and disconnected video

I have X8500BHS and video via HDMI works, but without GPS it is useless.

I went through Sumsung support hell and were told that it's normal that GPS and data got cut as I don't need those to watch on TV anyway ... , while another tech said it isn't normal and GPS has to work regardless - not sure whom to believe

What MHL adapter do you use that doesn't cut GPS signal?

Thanks.

Mike