tugboat
-
Content Count
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by tugboat
-
-
Seems that resetting everything including unplugging the harness from the back of the deck resolved the issue here. I'm thinking it was some glitch in the bluetooth connection, but I can't confirm that 100%
Thanks for the tips, appreciate it.
-
I deleted and re-installed all of the apps to no avail unfortunately.
-
Hey guys, hope all is well. My setup just decided not to work any longer - I just replaced my digital a/v adapter as well with no luck.
Bluetooth connects, the HDMI seems to connect, but when I try to access it, it prompts me to open the appradio on my phone and does absolutely nothing from that point. Sometimes I get the locked message as well.
Any help would be greatly appreciated as I can't handle another week of crappy FM radio.
-
Hey guys, firstly thanks for all the info I have gotten here so far!
I bought the F900 a few years back on Ebay and it's been in storage until this Tuesday. I remember powering it up in 2011 and saw it working then.
I installed it on Tuesday and everything ran as it should, although I didn't hook up the parking brake wire until further on in the day. I drove around and got a good 30 minutes use out of the FM radio. Later that day I got to the finer points of the install. Hooked up the parking brake wiring, VSS, RCA cluster connector and the GPS. I started up the vehicle and the splash screen came up, then came up again, and again...
At this point I started reading on here and got into service mode. I downloaded the FX 3.1 bundle and clean formatted an 8GB SD card and gave it a go. I followed the procedure to a t and hit the reset when finished.
The next time I started the vehicle up the screen was blank. I tried I few dozen times all to no avail, at this point I started going through the reset / test mode / etc. and nada. All that happens now is the unit illuminates, then sometimes flashes the LEDs and shuts itself down. I've tried everything imaginable and I cannot enter the service mode. I get the speaker pop but that's as far as it will take me.
Can anyone offer any suggestions? Much appreciated!
Thanks.
AppRadio2 (SPH DA-100) + iPhone 6 Plus
in AppRadio, AppRadio 2, AppRadio 3
Posted
You need the Apple adapter, an HDMI cable and a lightning cable to run it. It uses the HDMI for sound / images and bluetooth for control. The lightning cable coming out of the Apple AV adapter merely charges your phone.