mrgreek2002

I got an iPhone 4 a while ago and it works 100% on my B200 BT unit with my Avic-D3! It even automacally connects to the HU all by itself when it's near it, which is what I love so much about it! With my 3G iPhone, I would have to manually pair the phone to the HU, not anymore with the iPhone 4, it automaically pairs every time!

Thanks for the info guys, turns out I was doing it right, just didn't notice that the HUs volume was at zero, so that's why I didn't think it was working. But now that I turned up the volume, it works just fine!

Hey guys, I've had my D3 since it was brand new and it works flawlessly and has ZERO problems or issues, it's still looks and works like new.

 

I tried to insert an audio aux cable that is 3.5 male to 3.5 male. I installed one end in my iPhone 3G and the other end I put into the front aux port of the D3.

 

I went ahead and picked a song on the phone and nothing played out of the cars speakers. I had the D3 screen on the audio screen, not the navi screen, I had the radio off and everything else too but the buttons were still there and I was able to push them if I wanted to but I wanted the aux, not the radio or something else. I couldn't find a button for the aux, front or back, nothing is there in terms of a button I can push to hear the phones music playing.

 

So how do you get the front aux to start working then? I don't get it!

I concur with 1loudls, WTF is wrong with the OP?!?!?! I use my 1st gen RAZR with the BTB200 with no problems or issues, I never use the voice funtions though, I just dial the number like a normal person. I love how I can dial the number from the D3's screen instead of dialing it on my phone.

Maybe the iPod cable became a little bit loose on the back of the D3? I say you take out the D3 (don't unplug any wiring) and push in the iPod cable to make sure it's in all the way. Then put the unit back in the dash and try the iPod. That should fix it.

I can offer to sell the 2008 east coast disk if anyone else needs one. I also use Verbatim DL disks. The only thing is I'm up on the east coast of Canada.

Hello,

I am from Romania and i have AVIC D3. I want too know if i cant attach a GPS BOX too HU. Pioneer dont have dvd maps for Romania. thanks

 

You can't do it. Your outta luck. Sorry, move to NA!

Damn, that sucks. I once bought a TV from e-bay and it never came!

Really? So that means that Pioneer lied to me! Damn Bastards!

OK, so I took the initiative to call and find out. It turns out that you cannot take it off.

Hey, I was just wondering if the knob can be removed with out damaging it? I want to remove it and install it every time I get in and leave my car.

 

Thanks!

 

The knob I'm talking about is circled in yellow in this pic:

 

Yeah, all 0's works for me too.

I just down loaded the 2008 east disk off a site. It came as an ISO file. I took the ISO file and burned it onto a Verbatim 2.4x, 8.5GB, DVD+R, Dual Layer disk. The program I used to burn it was ImgBurn and I set the burn speed to 1x, which is the slowest option available to me. It took 40 minutes to burn it and another 30 minutes to verify it.

 

After it was 100% finished burning and verifying, I put it in my AVIC-D3 and it immediately started to update it. It took a minute and now it's all updated and everything works 100%.

 

I couldn't be any more happier right now! And it's thanks to this wonderful and helpful forum and the members in it!

 

Thanks everyone!

The D3 is one of the best Pioneer units. I have one and I love it. The F series sucks I'm told and is not worth the money. My D3 is 2 years old and I never had any problems with it. Yesterday I got the 2008 Map disk and it worked on my D3 with no problems either.

 

Get the D3, you will not regret it.

I just down loaded the 2008 east disk off a site. It came as an ISO file. I took the ISO file and burned it onto a Verbatim 2.4x, 8.5GB, DVD+R, Dual Layer disk. The program I used to burn it was ImgBurn and I set the burn speed to 1x, which is the slowest option available to me. It took 40 minutes to burn it and another 30 minutes to verify it.

 

After it was 100% finished burning and verifying, I put it in my AVIC-D3 and it immediately started to update it. It took a minute and now it's all updated and everything works 100%.

 

I couldn't be any more happier right now! And it's thanks to this wonderful and helpful forum and the members in it!

 

Thanks everyone!

There's also a few backgrounds on the map disks.

Yes or No?

 

Thanks!

Here's another one I just finished!:

[img]http://i7.photobucket.com/albums/y274/mrgreek2002/splashsized1_202copy.jpg[/img]

Here is a VW version of a current background that I just made:

[img]http://i7.photobucket.com/albums/y274/mrgreek2002/VWLoading.jpg[/img]

Ok, so I tried it out last night and it fixed the problem!!!

 

Thanks for the help!

 

Later!

Thanks a lot for the reply!!!

 

I will try that out!

 

Later!

... battery does not charge and as a result, I run out of battery all the time!

 

Is this normal?