gabontz

Hi,

 

I've got the F310BT too and I bought the CNSD-130FM for 170�. This SD Card inclueds new Maps for Europe and ne Software: 2.00000. My Last Software was 1.00005 and now its 2.00000.

U can use this SD only for 1 (your) Radio because there is a Key inside, u have to go online and put in the key and your device number, then the page creates a passcode for the installation of CNSD-130FM.

 

After the installation (which took 30mins) u have a complete new Menue on your F310BT.

Pioneer says that the F310BT will behave like the F320BT after the Software Upgrade.

Now i can use the Navgate Apps like a videoplayer... and it works a can look divx and Mp4 movies

 

The device.dat would be useless because the new Menue has an application Section, which the old F310BT @ FW 1.00005 never had. So it would be impossible to use that device.dat.

Hello,

Do you remember the link for that update?

I would like to generate my passcode also.

Well that sucks..

Still interrested in the mount command.

Scripting isnt the way to go then.

I'm interrested in the service manual.

If you look there you see a possibility to boot from external sd card. You can find it in the wiring diagram there is a little table there.

Another thing is the jtag connector. I am 90% sure that that is a way to unbrick.

We can then safely modify and test all prg files.

The point is the avic has a rtck wire. Adaptive clock. I dont know which (cheap) reader support that kind of jtag.

 

The avic has 2 jtag connectors. One directly on the nand or something and one on the cpu

Hello,

Can you plese provide the jtag pins?

yes, but you can try to put correct winceimg.bin and winceimg.cks on root of sdcard... it just doesnt seem to want to pick them up - unsure why... i cant really find the bootloader code for this unit... doesnt seem to use uboot like other avics..

I do suspect that there is some magic file or soemting you can put on sd card that will let it do flash recovery, but i dont know what it is...

 

what is nand flash method? im only aware of the aplupdate utility to get it into flashing mode, and that requires you to be able to boot into testmode. testmode should boot even if My Flash disk is toasted... there is a hidden smflash partition with the os on it... still, how to get it to boot?

I have another u310bt PND unit here that is in the same state... so far I have been too lazy to hook up jtag...

Do you have by any chance the jtag pinout of this device?

Pionara I do not know if you understand me, I'm Polish and I can little English but ok translator will do the trick

so you have to open the cap for the main board face AVIC where hidden flash drive, next to her on the right are tiny capacitors and this is important! give kabelkowi mass of the USB connector, and so on up the capacitor short-circuit making slight spark screen goes suddenly showed PIONEER and began to load up all the maps are

A teraz po Polsku 

Musimy rozebrać zdejmowany panel przedni i ściągnąć obudowe która zasłania pamięć flash po tej operacji ukarze nam się pamięć i malutkie kondensatory obok pamięci po prawej stronie i one są ważne

Bierzemy zwykły przewodzik i jedna część bieżemy mase od wtyku USB drugim końcem robimy leciutkie zwarcie po tych malutkich kondesatorkach powinny iść iskry aż nagle ukarze nam się na ekranie napis Pionner i zacznie ładować się system wraz z mapami nic się nie wykasowało

 

MogÄ™ naprawić za darmo wszystkim tylko wysÅ‚ać mi samo czoÅ‚o do mnie 

Hello,

What you are doing here is putting the VDD pin of the flash chip, to ground.

Mine is not getting working with this method...

PEOPLE I managed to REPAIR Avic F3210Bt with an error winceimg I'm working again TESTMODE

I have a soft 1.0000 and run their own applications mod       

Hello,

How did you managed to repair it?

Did anyone found a solution for this?

Hello all,
 
Does anyoane have a backup of "My Flash Disk2", from a F310BT.
I tried to update from here: http://avic411.com/index.php?/topic/37393-2013-eu-map-update-cracking/?p=271088, and got stuck at 98%.

Now, "My Flash Disk2" is empty and maps are missing.

If I use the 2.0101  App, the phone menu is grayed out, and can't use the BT.
 
Thanks in advance.