manio112

On 18/04/2018 at 5:23 AM, shadowman14 said:

i did it manually.
i copied the 2 language files on the directories on mrz05 and works perfect. the automatic installer didn't work on my mrz05.
thanks a lot dzo and fanourio for the advice of choosing japan language on the navi menus.
is there a way to reduce brightness or turn off display during driving at night ????

you can turn of screen by hold navi or menu button for few seconds 

after you press copy don't touch the (navi button) till you paste !!!! press left arrow to highlight "enter" and then go up (Volume button) till you get to a (..) in top subfolder then press (menu button) and again go up till you get to user then press (menu button)  go down to prg and press (menu button) go up or down to apl. and press (menu button) then move down at least once (volume button) and you should be able to highlight past with (arow left or right button). but make sure to don't press (navi button)!!! hope will work for you

read again and look at your video in 29-30second you pressing the (navi button) and thats why you cant paste later. 

after you press copy dont touch the (navi button) press left arrow to highlight enter and then go up (Volume button) till you get to a (...) in top subfolder then press (menu button) and again till you get to user, then prg and apl. then move down at least once (volume button) and you should be able to highlight past with (arow left or right button). but make sure to don't press (navi button)!!! hope will work for you

Hi morus,

 

May be I'm completely on a wrong track but I want to ask a question about GPS antenna. As far as I understand It's current antenna's port is locked by a DLL file so, if we don't want to use it's original navigation application this antenna is useless for us. Is it possible to detach this antenna from it's current connection and connect it as you explain to COM1? My unit came from Japan and it's navigation app. is totally useless for me. Thanks in advance.

adzam you need the gps reciver m8n connect to com 1 as morus set

HI azdam this the link for maps sorry for delay

magnet:?xt=urn:btih:A78E621785235B71046D5732EA5EF314D406B3F3

Take a look at the condi hackmode thread. I have explained there why you can't use the GPS port. It is already opened by "NPGPSENGINE.DLL" at the point when navi.exe is started and it cannot be opened twice. You either need the "Pioneerus" hack to get access to this port (ask forum user "Sanik") or you need to use an external GPS receiver as described in the condi hackmode thread.

Morus i read yours post and i alredy order the gps module so when i get it i will report if its working thanks for you help. also i try contakt with sanik but no reply from him

for those who are trying to use navitel the following lines may be helpful.

Who does not connect with the satellites (in the open), ie Navigator is set to COM port and speed than COM1 and 57600 bps, it is necessary:

1. learn the number of COM-port and the optimal exchange rate port navigator. To do this, use. / Utilites / PortTool.exe or see hint below:

2. replace the file. / Navitel.exe to a desired folder. / exe_---------_-------- / COMX / or use on the PC ./Utilites/Patch_Navitel_N-COM_WinCE_v1.1.exe and ./Utilites/Patch_Navitel_Speed-COM_WinCE_v1.0.exe

 

Who does not start:

- If you record a program on the navigator or flashcards, pressing the button navigation, Navitel does not start, the browser settings must

choose the path run \ Navitel \ Navitel.exe. If there is no choice in the browser start the navigation path, you need to rename \ Navitel \ Navitel.exe on track. To determine the path used in the browser by default with the hint file. / Utilites / Executable path run the software in some navigatorah.pdf. Or using the utility on the PC to find / change the path in the registry WinCE navigator: ./Utilites/CeRegEdit_Setup_0.0.5.2.exe

hi javed akhtar did you manage to run the gps to get signal from satelites?

Hi manio112,

 

I copied all files and directories of 'MapFactor NavigatorFree' Windows CE version to my MRZ02's USER\PRG1\APL (My Unit uses PRG1) folder, also changed the executable name 'Navigator.exe' to 'Navi.exe' but no way, it's not working.

 

I've found a Windows CE version of IGo, I copied all files and rename main executable as 'Navi.exe'. It's working but I have the same problem that device cannot locate GPS (meanwhile time is correct).

 

Questions are,

1. If it cannot locate GPS, where this correct time data comes?

2. If it is possible to run IGo, why MapFactor cannot be executed (both are Win CE version)?

I think igo find the gps port but its disconnected bay pioneer software

check last few posts on avic mrz-99 custome firmware for it

that very interesting post we try to hack the Japanese unit mrz 09 to work in europe so far we have running igo on it by replace original navi exe with igo exe (rename the igo.exe for navi.exe) but the gps port its locked so maybe yours solution will work. Also you can try replace the navigation in yours unit and see. hope the voice gonna work

manio112,

 

Can you please share your maps with us. By the way, which countries or regions you have?

all maps is 10gig so let me know what region you looking for

did you rename the igo.exe to navi.exe

Thank you very much for sharing the IGO files. I have tried it on my mrz05 but the system keeps restarting and does not work at all. Therefor I had to copy the original navi.exe file back and the system is back to normal. so far only navitel works on mrz05, but it gives "unregistered version" error and stops working. I will try to find some other version of navitel and give it a try.

sorry lads but was to bussy befor the christmas thats the link for igo  https://mega.nz/#!rdZSSKKJ!4k2Ow15sAWcNOCydw4sYn9td143ZVW9eLRpKYnhDqbs its no maps on it but if you need them i have 2015 

when i run the igo on my mrz he cant find the gps but its getting my local time set. i thing navigation get to the right port but its lock by pioneer. wonder if we can get a developer test mode key then will be acces to more options

thanks to Poligraf i manage to put igo navi on the mrz03 by add it to apl and rename but the same problem with the gps. i hope if we can put external gps recivier on the unit to fix that?

its on this post just go true pagese

check the dzo youtube video for it i have to play with that long time before figure how to paste. but press select then move to copy then go to top of folder and before you press anything move to enter, then navigate to langdata but you have go straight there

Hello.

I have MRZ05. Have read all the posts and got to the stage where I have copied the file from the SD card but it does not allow me to paste it to the langdata folder.

The "paste" option is greyed out and cannot be selected.

Can anybody please advise ?

Thank you

before you copy you have to pres select then copy and navigate to langdata

Hello.

I have MRZ05. Have read all the posts and got to the stage where I have copied the file from the SD card but it does not allow me to paste it to the langdata folder.

The "paste" option is greyed out and cannot be selected.

Can anybody please advise ?

Thank you

you can download backup this is from mrz05 and check with yours what is missing then add on but make sure you do backup of yours first https://mega.nz/#F!nUwjVLxZ!1soULiYcJRyf1W3ANrSFZg

HI TO ALL AND THANKS DZO FOR HIS JOB I HAVE BACKUP OF MRZ09 MAYBE SOMEBODY NEED LINK FOR IT  https://mega.nz/#F!nUwjVLxZ!1soULiYcJRyf1W3ANrSFZg