lcfield

They told me that the VERY NEW one have a different bypass technique. Mine was new in Jan 09 but still took the old bypass just fine.

What is the 3D Line in my 3D Calibration Status Screen on my Z3? The DISTANCE, RIGHT TURN, LEFT TURN are all ok. The 3D Line has nothing in it.

Sorry guys, I dont know where my head was. I know now that the camera is to be hooked up to constant 12V and grounded for the camera to work at all times. The Reverse wire hook up is the exciter wire to switch to reverse mode. My camera was labeled as a reverse camera with the directions telling me to hook up the red hot wire to the reverse wire to turn on the camera with 12 volts in reverse only. I know now that a lot of these GPS Navigators do not operate in a rear view mode, only reverse mode. For the camera to operate in rear view mode also, the camera needs a conststant 12 volt signal at all times and the head unit needs to be connected to the reverse or backup wire.

Sorry for the confusion, but I am gratefull for the help.

LC

Can someone give me a wiring diagram to wire in a 5 pin 12 volt relay using the "Backup Light" 12 Volt + Wire to trigger the relay so I can use the REVERSE camera and also the REAR VIEW Camera BOTH with the same camera?

Thanks,

LC

Is there any way to answer my phone with the Bluetooth but then switch over to my phone to talk in private without going through the sound system, or answer my phone then switch over to the CDBTB200?

Thanks,

LC