nmastudios

that was my problem (remote wire), when i took the blue/white wire remote from the n3 i hooked it up to the remote wire to the amp and thats it (which worked for my past two cars), completely disreguarding the blue/white on the factory harness.

but now i have the factory speakers working with NO Subs!
=(

when i hooked up the battery for the first time after correcting the remote.
The capacitor light up for the first time after I charged it. it read 9.4 - 10.1 never reached 12+volts (the N-3 on display says its geting 13.4volts).

And so now the subs are not playing audio.
You think the cap is blown?
Fuses are good.
I need to double check the remote line to the amp
because i had to rig the connection with tap on the terminal, because they shipped me one with outa screw for the hole.

One other thing. I mounted the ground wire (three spots) on a seat bracket that has a bolt and painted black and then under the carpet near the bolt which is painted the jeep color, and then on a seat stand, that fold down a little bit when the seat folds down this is connected to the bottom of jeep.

Is this ground good enough ?


Thanks so much, im so close to completing this installation =)

Hey im in a little jam,
05 jeep liberty
avic-n3
kicker amp,subs and spl cap.

installed everything at once, and everything on the avic-n3
is running and playing, but no audio whats so ever.
the amps not turning on either, as well as the capacitor.

any ideas.... Thanks so much,

ps. the options to adjust the bass,spl,and treble are disabled as well.
and i grounded the green parking brake, did not hook up the speed sensor wire or the reverse wire and i fliped the switch on the back of the head unit.

:wink: thanks for all your help