mjunaid4u
-
Content Count
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by mjunaid4u
-
-
OK, try these steps in this order: 1) Install driver (cab file) 2) Soft Reset 3) Check ports (My Flash Disk\System\serialports), make a note of which ports are used. 4) Plug in OBDII reader 5) Check ports again (My Flash Disk\System\serialports), OBDII should be on port 3, which was not present earlier. 6) Run HOBD, select port 3 (assuming serialport program shows OBDII as port 3) The driver should auto-load when the OBDII reader is plugged in after the cab file is installed, checking the the serialport program before and after is a good indication if it is recognised.
thanks alot i got it...
-
after installing hobd driver and copying everything from that folder i cant get the obdii working i have f900bt and the same elm adapter connected to the usb of my unit wanter to make sure that i have connected it to the right usb dont know if there is a usb in the back of my unit.. any help would be appreciated i tried different port numbers could not get it to work..
AVICnet 2.1 for AVIC F series, working OBDII! Updated 2014/04/30
in Completed Mods/Themes
Posted
i need a working link for 2.1 please