silver08
-
Content Count
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by silver08
-
-
Thank you.
Needed to finalize the disc and that did the trick.
-
Please help.
I'm using a CD-R (I've tried a few). I have loaded 2 of my own photos and one from this site into a directory called Pictures and I have added a data file greater than 100MB to the root. When I put the disc in the Z3 it recognizes the disc (Checking DISC msg) and it finishes with a message CD-ROM Inserted. However the button to load the images from disc is still not available.
Is the problem a result of the disc being "CLOSED" and not "FINALIZED"? What else should I try?
-
Looking for some help in completing the bypass process. I have the Z3 installed and using the GMOS module for Onstar in an '08 Enclave. When it was installed, the GMOS harness was connected to the Parking brake sensor wire on the Z3 harness. Do I disconnect those two wires, tape off the one coming out of the GMOS unit and ground the Z3 wire as part of the two wire bypass?
Fix for 3g Iphone not charging
in iPod/iPhone/iPad
Posted
Would you confirm that you are connected to the cd-i100 or 200 and are not using any other power source. I've been looking for a pass thru device for a long time and they all say that they don't work with the Pioneer interfaces. Please let me know.