andyhe

Who know???

Does somebody succeed in crack Pioneer interface, then We can use it connect to PC and operate PC with Pioneer Tuch Screen.

maybe NAVI port -------to------- VGA + USB(Tuch screen feature/ Keybord and Mouse) ???or Ai Net to PC VGA + USB.........

thanks....

1. As state before use the swi-x to get your steering controls back.
[color=red]I see. and just done.[/color]
2. The only way to do that would be to put a toggle switch between the blue/white lead from the pioneer and the power antenna lead of the car's harness.
[color=red]I can't understand also! Does it mean I have to run the antenas manually.[/color]
3. You'd have to run a wire from the red wire of the pioneer to the ignition harness in the car. Splice it into a wire that has power when cranking the car.
[color=red]Is your meaning: A/V's Power supply always on when ignition. If like this no damage to AV Machine????
I prefer to make the toggle switch on ACC cable (or red cable, power ), Manually power ON/OFF the machine.[/color]
4. Dunno since I've never dealt with a 6800.[/quote]
[color=red]Thanks Also[/color]

I got AVH-P6800 and Complete the installation work. But some question remaining.
1 AVH-P6800 can not use wired PAC SWI-PS tuning steering wheel.
2 The FM antenas still runing when the radio not be used. Can somebody stop antena when play CD?? method??
3 The AVH-P6800 active the monitor before ignition, and restart after Motor runing. Reduce life time. :evil: :evil: :evil:
4 CD mark can not be set automatic. it always lost track postion after change source.
May be somebody can help me.

[quote name="cntrylvr79"]Ok now I'm understanding your question. Though you are posting in the wrong forum. The 6800 does not have a wired remote input. In order to retain your steering wheel controls you'll need the swi-x which uses an ir transmitter to transmit the controls to the 6800.[/quote]

Thanks cntrylvr79.

[quote name="cntrylvr79"]Are you putting in a d2 or a z1?[/quote]

I use the AVH-P6800DVD. but I think the Steering wheel interface should be same, if aviliable.

By the way, I got 2 model SWI-PS from internet. Which one is used for AVH-P6900DVD. some difference between the two model????

one is SWI-PS
[img]http://www.pac-audio.com/products/images/swi-ps.jpg[/img]
other is SWI-PS NEW
[img]http://akamaipix.crutchfield.com/products/2006/127/h127SWiPS-f_dg.jpeg[/img]

[quote name="cntrylvr79"]Look at page 7 of the installation manual. It points exactly to where the wired remote input is on the back of the unit. which incidentally is the headphone jack right next to the fan on the back of the unit. If I remember correctly it even says wired remote in on the unit. Almost forgot that picture is useless since the back of the d series is completely different. I'm the evil cop yay me.[/quote]
Thanks!!!
But I still not find it, following is page 7. please check.

[quote name="gadgeeets"]the wired remote port just to the right of the fan[/quote]
[color=red][size=150]sorry, Which ports you mean??? # is what??(see attached pic). thanks[/size][/color]

Refer to Menu:
1: IP bus input
2: Reverse switch
3: A/V output,Phone Mute,Lighting........ and etc.
4: Subwoofer out
5: Optical
6: Parking camera input
7: RGB/GPS Navigation in
8: AUX in
9: FM Antena
10: AV bus input

Who can tell me which port is used for Steering Wheel control on the Pioneer AV machine. I still not find it, Instruchtion Menu also not show these information. if possiable please show me with the picture and port Name, wiring, and etc.
Thanks Thanks..........................

[I use Pioneer AVH-P6800DVD, but I think the steering interface should be same with AVIC.] I will use PAC SWI-PS tuning my car. Thanks reply.!!!!!!!!

backside view

[quote name="dubdiesel1"]does anyone know if you can put custom backgrounds on the 6800dvd yet and if so how/
thank[/quote]

same............