roscoerobinson

Anyone???

Thanks, but it looks like li'l soldier boy just needed a direct order to get the point.

Guess he doesn't realize that the don't ask don't tell policy isn't limited to what him and his buddies do between tours of duty.

And for the record, despite my criticism of US foreign policy I generally commend those in the Armed Forces for their bravery. But this asshole showed what he really thinks of the people whose freedom he's defending.

Fuckface should stay off the internets where he can't just shoot the person who calls him out for being a fucking idiot.

Let this be a lesson to those who reference gain settings by where the screw slot on the pot points to on the dial -and even worse, those who swear by setting gains with a DMM:

bust out a scope, and a test cd with a 0db test wave (or several at different frequencies) adjust the gain to max w/o clipping, and then back off a bit. Not just randomly set it to 1/2 or 5/8.

To anyone who is interested: I bought the unit, and it does put out 2.2v without clipping, but that requires that you max out the EQ, SLA, etc.

and oh yes, i really work at mcdonald's when i serve this country year in and year out just so stupid FUCKS like yourself can be regular stupid idiots in our country.!

Man, I knew you were a tool, but I didn't know that you were a TOOL!

You motherfuckers are supposed to be taking orders rather than making assumptions about the lives of others.

Perhaps I was too vague before, so let me be clear:

Cadet, I command you to SHUT THE FUCK UP.

more brillance on your side because its obvious that nobody here in this forum is willing to help your stupid ass! get off your stupid ass and find out the output voltage for yourself.

 

if your weren't such a jobless fuck, i would of told you what i found out 6 months ago cuz i have measured the output voltage!

 

and i will state again, it doesn't matter what voltage it has cuz if you really cared about sound quality then you'll get a line driver or just do what most people do and turm the gain up to 1/2 to 5/8.

Proud to be a tool? Keep that to yourself, and enjoy your J.O.B.

With that kind of dedication you'll move up to fries in no time.

If you read the first post, it states:

This is a pre-purchase question or else I'd do it myself.

So again, you're the genius

I guess I'll just have to "turn my gain up 1/2 to 5/8". How the fuck do you know what the input sensitivity is on my amps, or how linear the potentiometers are, or if I'm sending the signal to a processor first, or what the fuck else I could be possibly doing in my system?

And for that matter, care to explain how you measured the voltage? If you actually did, you would have just stated so in the first place, instead of your opening brilliance in this thread.

Go fuck yourself, you fucking retard.

...And enjoy being a fucking tool. I like hamburgers, and I'll always need fries to go with them.

Who knows? Maybe you'll make assistant manager one day.

Hey dickhead I meant line driver that raises voltage. Ge'ez this dam forum has such rude ass people. Get jobs people!!!!!

Yet more brilliance, and even better than before!!!

Keep 'em coming. I'm really impressed with and interested in your opinion and how you're using your equipment despite the fact that...

IT HAS ABSOLUTELY NOTHING TO DO WITH THE FUCKING QUESTION I ASKED.

doesn't matter for me cuz i just use a voltage reg before the amp

Oh, great. More brilliance.

Anyone?

I know they're supposedly rated at 2.2v, and the owner's manual says 1.7v.

But has anyone actually measured them @ 1khz 0db?

This is a pre-purchase question or else I'd do it myself.

Its stereo. You shouldn't have a problem using a Y-adaptor

Thanks, and I like your avatar. Nice little play on words.

i thought that the rf 360 was for integrating into a factory system. Why would you use it when you have the rca out puts on the d3? The 360 converts line level to rcas to run amps. There should be no need for the 360.

The 3sixty.2 does alot more than LOC. If you're genuinely interested, you should do a little research. The internet is at your fingertips.

That's an ironic signature you have there, considering it woulda taken less time to go to RF.com than type that post.

Not tryna be a dick, just sayin'.

No one?

Merry X-Mas, anyone???

Is the sub out on a D3 mono? -Yes, some people do run Stereo subs.

Reason I'm asking is because I'm thinking of buying a used D3 and need it to go to my RF 3sixty.2 which has a single RCA in for the sub. I have a y-adapter, but I've read that Pioneer headunits will blow a fuse if the RCAs are shorted.

Also, has anyone actually measured the output of the RCAs at 1khz 0db?

Thanks for the help.