joshs

Had the same problems with 2 Treo's... Just got the new BlackBerry 8830 and it works PERFECT!

Using the factory screen. No scaler or anything

Picture looks great. As good as on the Z1 itself..

Just use the right adapter. I think it is the same as the newer Chrysler one.

I have not had time to go back in and play with it. All working good, still no steering wheel controls-

Whoa... Yeah, they are a little mis-informed. That may have been the case about 6 to 8 months ago when the first GMT900's started rolling off the platform.

Not the case now... Check out http://www.pac-audio.com/default.asp

They have recently released the OS-3Bose interface. This is what you need to retain chimes, onstar, etc. It works Great! The only thing that does not work is the Avic wont fade front to back... Not a big deal in my mind. Everything else is flawless. Pretty simple install too. Plenty of room behind the heater controls for the PAC module.

I installed the bluetooth right under the center console. Pulls right up and out. The XM Navtraffic and Ipod are behind the glove box. This is where the factory XM was. Plenty of room up in there. Oh, you can use the Factory XM antenna, just need to shave the nubs off the male end of the Navtraffic unit. For the GPS antenna, the a-pillars and then front of the dash pops up with 5 clips. Almost directly in the center is a little recessed area where the factory GPS mounts. Stick the metel on there, stick the antenna to that and you are done. Hope this helps.... BTW, sounds so much better than the stock HU-

Well, Install went good. Z1 is in and a rockin. Bluetooth, Ipod and XM with NavTraffic all fully functional. This thing is too cool. Glad I didnt get the factory Nav.

Used the PAC OS-3Bose interface to keep all chimes, Onstar Amp and Sub. Interface works good.

Bought the Pac SWI-PS but cant get it to work.... Tried the programming like a billion times. Cant get it to go into programming mode. Thought this would be an easy install cause the OS-3Bose harness has the wire right there to hook to. Gonna call PAC on Monday. Maybe it's a bad module.

Didn't get the camera in but wired and ready. Just got to figure out where I am gonna mount it.

Tapped into the rear monitor too. Wires right in dash. Easy!

Oh, by the way... I had the infamous buzzing when button pressed issue. I had the mic in the wrong hole! Duh.

Thanks for a Great Site!

Anybody got any ideas on location??

Many Thanks... Finally got all the stuff in and gonna install this weekend!

Thanks Again-

Anybody got the VSS info for a 2007 Denali

Thanks! Great Site!