dle619

can someone post me the commonlib.dll and the mainmenu.exe for the 2.x firmware, thank you.

Hi,

I am on the F700 with firmware 2.x installed. Is anyone on this FW tried it? Where can I get the file? Does it use both the .dll and .exe? Can someone post the files, thank you.

This happens to me sometimes especially you have more than 1 videos on your ipod. I had a 30gb ipod video. It shows the pause image and does nothing. What you need to do is to unplug your ipod video, go to the ipod's main menu and select settings. Now scroll all the way down to "Reset to Factory Setting", click on that and confirms it. Once the ipod boots up again, plug it back to the avic and all videos should work fine.

Make sure that the AV1 setting is set to ipod in order for the sound to be heard.

I live in San Diego, we have downtown build here too. When you said set an address to downtown Chicago, do you mean then route and go there from san diego? How do I just jumped over Downtown Chicago? Any help is greatly appreciated.

how do you get to Manage POI screen?

Hi,

I update the map to 2008.4 and poi to 2008.10. Put in all the buildings and have the worldwide license and the hacked ezrider.exe. I still do not see any 3d building. Does any one know why this is? I read all the forum and still don't understand why my map does not show 3d building. Another question with the branding POI, there is a setting in manage POI to set to show or hide from the map?

please post the 13 rar again, thank you.

see my latest solution without involving copying xx.db file to SD card, it is a much better solution.

http://avic411.com/forum/viewtopic.php?p=152487#152487

see my latest solution that I posted:

http://avic411.com/forum/viewtopic.php?p=152487#152487

Hi folks,

If you are having trouble with the caller ID is not working by just showing phone numbers for incoming call, then this is the solution. Before, one of the suggested solution was to copy the xxx.db file from the 700BT unit to the SD card and edit on your pc using a plug in and then replace the modified file back to the 700BT unit. I tried this but it is not a very convenient way to do this. This is not good enough for me so I have been trying to find a better solution and I finally found it. Here is the new solution. Now this is on my Iphone 3G using Microsoft Outlook 2003 to sync contacts. The problem was that Microsoft Outlook was auto formatting the phone number by adding parenthesis, space, hyphen, etc when adding/editing phone number. To resove this root problem, one has to shut off auto formatting some how and Microsoft does not tell anyone how this is done. Anyway, to shut this off, do the following:

1. Go to Control Panel -> Phone and Modem Options. In the location list, you should see your location, highlight it and then click the "Edit..." button.

2. Change the Country/Region to Afghanistan and change the Area code = 1. My country was USA, which Outlook will auto format the phone number.

3. Go back to your Microsoft Outlook and edit All your contacts and remove all the +1, space, -, (), etc. Your number should ONLY contain numbers.

4. Go to your 700BT unit and transfer/sync your contact list once the phone is connected via Bluetooth.

5. Incoming calls should now show the matching name now. No need to copy the xx.db file from/to SD card anymore.

6. To verify that all phone numbers contains ONLY numbers, you can boot in test mode and copy the xxx.db and open it up with the plug in, it should look EXACTLY how it is in Microsoft Outlook.

Note:

Some incoming call may have a 1 prefix before the area code and some may omit the area code, depends on the caller's carrier. If it does not match and just show the number, look at the number and go into your MS Outlook and change it to match the incoming number and repeat steps 3-5.