Ray Man
-
Content Count
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by Ray Man
-
-
Just updated my F700BT today. Everything went as advertised. No glitches, hangups or error codes. Took about 45 minutes. All is well.
-
All is good in cameraville.
Looks like I didn't have a proper ground.
Now if I only knew where to find a switched positive lead in the trunk.
-
Hey guys,
I'm trying to install a backup camera in my 2009 Mustang to a F700BT but I am getting no picture. I have tried two different switched power sources, one behind the unit and one under the center console, both read 12v on a meter. All I get is a blank screen.
The bullet cam has three leads, pos, gnd and video. I hooked the camera up to an AC adapter plugged into house current and it worked fine on the unit. I just don't get anything with the cars power leads. Any thoughts or recommendations?
I'm going to try and hook it directly to the cars battery and see if it works from there, I'll let you know. I assume this needs to be connected to a switched power lead so the camera is not drawing power continuously?
Thanks in advance!
Ray
Backup Camera Install Question...
in Problems/Troubleshooting
Posted
Just a couple of updated pictures, mounted the camera in the trunk keyhole...