4x12Tum

Time to rename this the "Me Too" thread! Seriously, the OP has a total of 3 posts, so I wouldn't hold my breath waiting for a response. Maybe a PM will do it. Has anyone gotten a response? If not, I think you're S.O.L.

i send a PM no answer...

Me To!

my unit has lost "nand data parts code" (no_set)

 

I check on the self-check program say it!(Nand Flash) !!ERROR!!

can I somehow transfer these files manually from the upgrade?

where will these be that case? "NDATA" is empty on the device.

 

it refuses to start updating automatically:

 

All files located on SD card.

j: Firmware (folder), plus all the content of the folder

j: Update (folder), plus all the content of the folder

j: CARDINFO.cif (file)

 

any ideas?

now I have sent in my stereo for repairs

my unit has lost "nand data parts code" (no_set)

I check on the self-check program say it!(Nand Flash) !!ERROR!!

can I somehow transfer these files manually from the upgrade?

where will these be that case? "NDATA" is empty on the device.

it refuses to start updating automatically:

All files located on SD card.

j: Firmware (folder), plus all the content of the folder

j: Update (folder), plus all the content of the folder

j: CARDINFO.cif (file)

any ideas?

You know what, it's funny because I actually posted that information here:

 

viewtopic.php?f=57&t=34478&start=135#p230618

 

Over 6 weeks ago, but I completely forgot about it. I disregarded it because I didn't understand what +B and ACC meant, but I didn't even try out the combination.

 

It seems like we can do some hacking without bricking. =D

 

Edit: Just saw you posted the key.

 

Very nice! Where'd you get it?

 

But how do you access the SD if the machine is bricked and won't open?

I'm not sure but should go through the USB?

I think that you can always open o access the SD card even if you happen to make a misage, i haw accidentally delete o mixing software (old with new) and try to upgrade my device, but it just will not! have tested your files o mixed them with the new but to no success However, successful transfer some files manually now, so I've seen a glimpse of the new software, (forced Writing, and evriting looks ok but, ("no applicate program") but it does not work at all as it should, check it in the info on the stereo you get the answer remains that it is an AVIC-F10 do not really know what to do:-S I can drive back the upgrade (org Program), it starts automatically! but neither one of the files except the hacked...

Service Manuals:

F10

Download AVIC-F10BT.pdf (25.3 MB) for free on uploading.com

F20

Download AVIC-F20BT.pdf (4.3 MB) for free on uploading.com

pass "avic411"

You asked for it, now I have successfully found it!

2. How to Start-up Test Mode

Start-up by operation of the product.

1. Enter the following password while +B, ACC are ON (Normal application start-up status).

Start-up by SD card.

1. Download GGS1080 from the Service Site.

2. Decompress the file.

3. Copy the decompressed file to the SD card root.

4. Insert the SD card to the product and turn ACC on.

2. When the password is correct, restart begins and test mode menu is displayed.

1. Press [HOME] key.

2. Press keys in the order,

Real TESTMODE File!!

TESTMODE GGS1080.rar

hi all

so there's no way for me to get updated file via torrent any more?

anyway or anyone can help me to get the file for updating?

would really appreciate it, thank you!

 

K.J

the torrent still works but you must have "DTH" enabled in utorrent.

and I tried to get updated to work on the "EU" ver but it did not!

was told that there was no usable software ...

its possubel that the Flach back with the first software!

tried all possible variations to get it work, and force write in "service mode" (mode right-left ...) so it says 2000. in almost all parts but it refused to start, so may be that Pioneer has a few diodes to set the version of the device you are using hardware that prevents regional change, Sony has this on several of its units.

However, this should go o see via schedule or on the motherboard near the CPU, some

diodes or jumpers are not soldered ...

Perhaps it is country filter? not allows me to leech?

im from sweden.

I wanted to see if I can use those files on my EU unity.

and if anyone has the European maps, but i think that my country is in the torrent version

Unfortunately no seeders of the torrent anymore, I would like to get the new EU maps.

and the files will not download anymore "too big file for o take it down for free"

and others seem to be deleted, I do not want to pay for the download when I do not know if it works ...

Unfortunately no seeders of the torrent anymore, I would like to get the new EU maps.

Unfortunately no seeders of the torrent anymore, I would like to get the new EU maps.

it was DHT screwed for me

Hello!

I have found firmware files to the AVIC-F10BT when i open them it says

AVICZ110 but it's the same type machine as it is right, have tried to flach

my device and it finds files o overwrite existing files with the new one.

ver: 01.0000 the new will be 01.0004 but are the same files. (01.0000) even after flach...

so now let's see if it is possible to mod!

Remember that I am not taking any responsibility was that can happen to your device!

or how it is used! you do everything at your own risk!

Anyone have any good programs for o open software data files. dll,. exe,. img?

has opened a part in notepad and Hex Workshop seen some funny stuff i don't understand,

and also that there is one IMG file but have not managed to open it yet! (it includes the files for the map (arrows and pictures, etc.) )

if you succeed so you will know where to write

http://uploading.com/files/29c2m772/AVICF10BT_APL1.0004.zip/ (EU)

Pass: avic411

The unit is fairly new so it is not certain they can get hold of them now.

I have the org files to the AVIC-F910BT from Pioneer 3.xxx eu.

To remove lost passwords was just unfortunately too easy to delete

I hope no thief learns how to delete these ...

if I succeed, I will tell you how to go!

When you own your own stuff you should change them as you want it, right?

I have already figured out, DOS is not new to me ...

not be so angry,

I think I can get them.

I think I can get the files to the device and then be able to change them.

then put them back in the device ...

crap:? can of course declare that it is so fast!

Waste of money but it's a good unit anyway.

From what ive read it isnt possible to hack. so i understand that only the f series hu's where hackable due to an error with pioneer's firmware upgrade patch for the avic f sries only that error made it possible for users to enter winCE at least that was my understanding from reading previous post'si maybe wrong but thats what i read.

hmm okay as bad, but I'll check with my contact if its possible.

Give it a try and let us know if it works.

I am in full swing and test but has so far prevented managed to get it into test mode once

No one has succeeded with this yet?

sorry for my bad English

Hello!

I'm looking for Test Mode to the AVIC-F10BT EU ver.

I got my AVIC yesterday and test run it in my living room to test.

have not been able to get it to work with speed cameras.

then how do you get it to enter in test mode? is it possible?

is the WinCE or Windows Auto on the device?

I want to be able to modify and run the Swedish charts, and "Land Register"

have searched around a lot and did not find anything

This should be an official AVIC-F10BT thread!

This is of course a new device that has existed in Sweden since August 2009

and running v.1000 so it does not come out well so far hacks

and it is not too expensive right! 19.000SEK about: 1838 EUR: - /

so it's probably not many who dare to hack this?

Hello!

I just got my own Avic-F10BT so i borrow this thread...

I have just looking for modds and fun stuff but I don't find any

im sorry for my bad eng

/Stefan (Sweden)