-
Content Count
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by MikeKelso
-
-
make sure in the settings you have the aux set to ipod.
I suggest this only because I accidentally changed the source to something else and couldnt figure out what was going on.
-
I was told by an installer to use this wire last week but unfortunately it does not work.
Will search for a good location to tap the abs speed sensor at some point.
-
HU security is what I was talking about.
Thanks to you I realized I didnt need a 16 letter password and voila, I have access again. Will be storing that password so this doesnt happen again.
-
Ok having a bit of an issue after moving my z110 to my wife's car.
it is asking for a password. I have tried every thing for a password and no luck.
you can read more details in my other thread. (sorry for duplicate just want this to work for our trip on friday)
if anyone can help it would be greatly appreciated.
-
couldnt sleep, had to try reinstalling the upgrade.
Wont do anything until I put a password in.
I can put the SD card in but it wont read it without the password first.
-
I discovered I can insert a SD card so I will try to reprogram with the 2012 maps again tomorrow. Hopefully all goes well.
input from others is still welcome though.
-
Moved my z110 to my wife's car today, unit sat powerless for about 2 weeks.
everything hooked up and upon power up the unit is requiring a password.
I have tried "passwordpassword" several times with no luck. also tried putting in 16 1's, or 0's, 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6, still no luck.
I purchased the 2010 upgrade before I knew about this site and tried the password from that but that didnt work either.
also, I did the 2011 upgrade via this site too.
can anyone help?
leaving on a trip friday afternoon, would really like this to work.
Mike
as a side note I would like to mention I have the following connected.
XM receiver, iPod cable, BT Mic, Rear view cam, GPS, axxess aswc-1 (steering wheel control interface). only thing new is the swc interface, everything else was installed and used flawlessly on my FJ Cruiser....
-
since ford got rid of the actual VSS I opted to tap the output shaft speed sensor wire coming from the power train control module.
Now I get a low voltage read from that wire but it doesnt change very much at all as vehicle speed picks up.
will this wire work for the VSS or should I try and track down the speed sensor coming from one of the ABS units?
I am only using it because the metra axxess steering wheel control module mentions tapping the VSS.
thanks
Mike
-
You need to add either this, http://www.pioneerelectronics.com/PUSA/Car/Accessories/Satellite-and-HD-Radio/GEX-P920XM, or this, http://www.pioneerelectronics.com/PUSA/Car/Accessories/Satellite-and-HD-Radio/CD-SB10 in order to control SAT radio.
-
yes it does. I have the 110 as well.
-
Nice thread but I am lost.
I have the Z120BT and downloaded the torrent, copied dat and other file mentioned on a 8GB SD Card, turn on the car and inserted the sd card but nothing popped up prompting me for an update, didnt even see the card. I formated the card to fat32.
Do I need to be in test mode?
I am sure this has been mentioned but I see instructions for the other models.
I have to ask only because I did this by mistake myself, did you unzip the torrent or just place it onto the card immediatly after downloading? I was in a hurry and threw it on at first which gets you no where.
-
that may have been for the not so easy testmode version.
glad it all worked out for you.
-
Ermmm... Still on that screen...
you have someting wrong on your card. That screen should not come up.
I just updated mine this afternoon following the steps in post 1 to a T and everything worked without a hitch.
Go back and try again.
remember, you only need one card and the card only needs Cardinfo.cif, Update folder, and firmware folder... nothing else.
just use the correct version of the cardinfo.cif (since it appears you are using a z110) and replace the verinfo.dat with the updated version (this can be found in the update folder)
all you need is in post 1 and I can understand your frustration, I dont tinker with these things like others so I have to read, re-read, and read again before it all clicks.
best of luck.
-
Well I feel silly.
Your remark about the av1 settings got me thinking about the settings section. I had inadvertently turned my av1 setting to off while messing around with things months ago.
Problem solved and i will wear my dunce cap for the next day or so.
-
checked the connections and they were still good to go. I even pulled the cables out and inspected for cuts, cracks, etc... but they are still good. Also, pulled the unit out enough to remove connection from back of unit and re-insert it and also try and wiggle and apply pressure to see if it wasnt seating well.
long story short, I still have no iPod audio.
considering calling Pioneer on the issue before I install the "free" map upgrade.
thoughts, concerns, anything?
-
I have tried a few other iPods in hopes that was the issue but unfortunately that didnt solve the problem.
I will double check the connections again today, takes 5 minutes to get to so no big deal there.
-
I have the Z110 with the 120 upgrade and a few months ago I lost the audio from my iPod. I still have control of the iPod through the unit and video playback is fine, just no audio.
I have the Pioneer brand cable and the cable is just now a year old. I have checked the connections and they seem to be intact.
Also, the unit itself is a refurbished unit.
any thoughts on this issue?
thanks
Mike
-
Ok I need some help.
I have a Mac and I have never dealt with a torrent.
what client should I use and can anyone provide some step by step instructions?
thanks
a newb
-
sent you $12 for good measure and for being kind enough to get this done.
thanks again
Mike
-
you have me listed twice in the list.
-
Getting real close to the quota, anyone know how much is the total cost (tax, shipping) of the upgrade?
looks like $5 for UPS ground shipping. Im tax free in MT so cant help you with the second half of the question.
-
I am willing to send 10 also.
-
how bout something involving the Toyota FJ Cruiser for a z110?
anyone?
-
how bout something involving the Toyota FJ Cruiser for a z110?
anyone?
z110 w/ 2012 maps-- Password required after battery disconnect
in Problems/Troubleshooting
Posted
Yea that is likely going to happen in the near future to avoid further embarrassment.