DeEePiDDy

Are the face buttons on the Z140BH actual hard buttons? or is it a touch sensor?

Well will it be plug and play? Or will I need to redo the bypass etc..

Direct swap, plug and play.

 

 

What about if I wanted to Upgrade to the Z140BH? Would this also be a direct swap, plug and play?

Hello,

I currently have a bypassed x920bt installed in my car. I also use the aswc steering wheel control unit. I'm looking into upgrading my Headunit to the new z140.. Will the z140 be an easy upgrade? Simply plug and play with my current harnesses and wiring? or will I have to redo everything.. Reprogram aswc, new bypassed harness, new nav antenna, new mic wiring, etc?

I currenting have the x920bt installed in my car with the video bypass, rear view camera, and ASWC steering wheel control installed.

If I were to upgrade to the x940bt could I just swap out the headunits or would I have to use the new harness adapters, redo the bypass, and reprogram the ASWC? or could I just plug in all the connections from the x920bt and everything will work? I really dont want to have to rip up my dashboard...

Hello all,

I have a bypassed x920bt installed in my car. I also have the Metra ASWC hooked up to my steering wheel and programed to the x920bt. If i were to just swap out the headunits and keep all the wiring as is, will the x930bt by bypassed and would the steering wheel controls still work? or will i have to redo the bypass with the x930bt harness and reprogram the ASWC?

thanks

I have an Avic x920BT and was wondering if i could get the "Caution Image Screen May Appear Reversed" warning to be removed

Is there a Mac version available?

Sorry if this has already been answered, but in what order do videos playback on the SD card for the x920bt? I have a bunch of TV shows are a numerically organized, however the playback order seems to be random.

Thanks in advance for your help and once again sorry if this has already been answered!

I found out what the issue was..

The Kenwood CMOS-200 has a wire that's supposed to be wired to the reverse light only if not hooked up to a nav.. this wire was hooked up which causes the camera to be shut off when not in reverse, even though its not where it gets its power...

I believe it is wired to the reverse brake light... where is it supposed to be wired to?

Hello all,

I have a Pioneer X920BT and a Kenwood CMOS-200 Rearview camera. The rear camera only turns on when the car is in reverse. Whenever I go into the settings to turn on the camera to see whats behind me while going forward or to adjust the video settings I only get a black screen. Why is that? Is it my camera? or is there a specific setting I need to work around?

Is there a way to increase the brightness of the screen? WHen driving during the day there a often a glare on the screen of my x920bt my screen that makes it very difficult to see...

darn... i have the x920bt!!!

Is there a way to have BOTH a USB input available as well as have the iPod cable hooked up? I see the Kenwoods have both available simultaneously.. can the x920bt do it as well?

Is there a way to get rid of this warning?

Is there a way to make the Album art visible when playing music off an SD card? my x920bt only displays the album art when using an ipod..

Hello,

This may sound like a stupid question, but I'm new to the whole bypassing stuff. In fact I'm new to using Aftermarket Car stereos and Nav systems (before my purchase of the Pioneer X920BT I was strictly Factory OEM). I'm curious if I upgrade my Firmware, will it get rid of the Bypass that I had done?

Thanks for the help.

I received mine yesterday. Sent it back in early September. I sent it off with the mindset that if I get it great.. if not oh well and it finally came so its an extra $100 in my pocket!