jzsax1

You know, you can back peddle all you want, but you said

ause of useless data stored in some poor smuck's server.

That isnt directed towards 'others' thats directed to a single person... aka smuck. So' date=' saying you werent pointing out Jason directly, is clearly untrue. While I agree with your "people just post crap just because they develop an..." comment, it is clear that is not the [u']only[/u] intention of your 5th post here. Consequently, I hope that my response to you right after that was clear to straighten up things for whom you were calling a smuck. That would have been the better time to back peddle and say sorry, poor choice of words cuz its clearly there as quoted above. And, he is paying for hosting services. So, are you still saying that he is the smuck or not? with your rambling 'figurative' speech, its still unclear.. especially to me because of the reasons you have given thus far, to whom the smuck comment was directed to.

 

You lost me on the joke part. What does cracking jokes and your further ramblings if not the first rambling post you did in this thread have to do with anything? Your first post in this thread consequently has been edited, long after it was originally posted. With that you have eliminated the ability to read what it was then, its now doctored to reflect a more on topic post, good job.

 

Just the same your pissing match is over. You have insulted JasonH in my eyes clearly, and very possibly others that have taken the time to read this... because after all it is HIS server, and he does pay a hosting bill which was what you said was required for whom this was directed to. Short of apologizing for those initial comments and the further ramblings that have taken over this thread, you sir, have been upgraded to 'idiot' status. No jokes. Honest truth there.

 

For the rest of the readers, sorry for my ramblings, I just see a need to out the idiots and flamers who want to insult without clear knowledge. Clearly poor choice of words have been used here today.

Wow..... how did all this helped me or the original thread author to find out if his D3 is RAM upgradable? Honestly...! how...?

Honest man, for someone that is crying foul so loud about me insulting indirectly( and it was truly not intended that way) to others on some "figurative" speech, you sure have no problems insulting me...

Again this is a prime example of junk posting... i read all that just for you to say something that has been said before...

keep it simple, keep it clean and intelligent and keep it within the confines of what is being asked. How hard is that....? honestly...

i replaced the discs and the problem went away!

i had that problem. i replaced the disc and it want away!

replace the disc

that wierd.. i had a similar problem... turned out my backup navi disc was scratched. replaced it and the problem went away!

i reset the calibration on my unit and blank all the values and the problem went away!

nice..! now i can work on this...!

Are you suing backup DVD's for navigation..? i was running into a similar problem with mines and it turned out to be stretched optical surface on my backup DVD...

dude...

this happened to me once... i reset my AVIC and it went away... i lost all my customer settings though...

i quickly discovered that the AVIC has independent volumes levels for both Audio and the the BT module and i have set it all the way down... try messing with the Audio Knob when making a call.

ooppss but of course..

2002 Lexus IS300

Aftermarket Amp..

Speaker Set....

i currently have the IPOD cable

6 disc CD changer...

XM Navi Traffic...

and AVic D3

I'm getting alternator whine through my speakers.... do any of you know how to correct this problem>>>????

try hitting the reset button on the BTB and power cycle your cell phone.

Well i believe the module itself its a hideaway unit. so its somewhere in the universe of my dash.

I started experiencing this noise problem when i started using the EQ on the ipod. I turn the EQ settings off and the problem went away

Just open up disc copy in Nero. Worked perfectly, no extra steps needed. You must have a Dual Layer burner in your computer for this to work properly though.

 

 

Thank you!!!^^^ For the hundredth time ive repied in reference to this! You dont have to do any special steps to this, just use the copy feature in your burner app! Thats it people!!!

Confirmed. i just used the copy disc feature in nero 6 and my disc is working great..!

ok here is the problem, after a while of use the BTB200 will stop the redirecting any callers voice through the AVIC D3 so basically i cant hear what they are saying. Sometimes they can hear me and sometimes they just don't. Now the only way i have found to correct the problem is to disconnect the battery for a while which would also entail loosing all the custom settings i might have on the AVICD3. Does any one know how to reset the module from the AVIC itself or maybe how to correct the problem?

yeah, it's kind of unintuitive, given that the XMTRFC button is in the bottom right ... the answer buttons pop up in the top left.

interesting, i have never seen these options. The question itself is a yes or no question. i just dont know how to interact with it.... weird..!

I know its obvious i just dont know how to repond to the question within that screen, i am a XM subscriber and i also have traffic. The AVIC is asking a question i just dont know what to do to update or what to press,,,

ok guys there is a little button labeled "XMTRFC" on the map that when you press the guidance voice will tell you "there is no traffic information on your route".. there is a question on the bottom that say Do you want update? how do you update..?

Wow. that was very dumb of me...

I have the XM with Traffic module mater to the D3 but today is not displaying XM radion station banners or any ART. Any ideas on the problem or maybe how to reset the unit..???

I'm getting the same whine from Alternator... Damn....

this sucks... someone grounded my RCA's but there is still some left...

is it possible to copy my d3 disc?

i have a scratch on it and it might be the reason why my nav is not giving me all the navigation options on the screen

if so what program do i use?

What exactly do you mean with options? if your parking break is off, then some of the options will be disabled by the AVIC. Try before and after to see if this is your problem.

Does anyone select the options in the "Staging" section of the sound menu (like music studio/dynamic theater/actor's stage/living room)? I have gotten the levels the way I want them in the EQ, but I have a friend who insists that the speakers sound way better with the staging off, and I say it sounds better usually with the "Dynamic Theater" setting. I know that sound is subjective, and I have my theories about why I like this better, but I'd like to get your input and find out whether or not I'm just crazy.

 

p.s. the speakers in my car are component infinity's in the front, coaxial infinity's in the back and one infinity 10" reference sub, in a VW GTI.

 

 

Any thoughts?

 

 

Who cares what your friend says potentially sounds good or not? Sound is subjective. It's your car. They're your ears. Set it up the way you want. Don't be your friend's little bitch.

agree...

Set it up the WAY YOU like it.. and thats the end of the conversation. If he insists, tell him to go scratch a nut somewhere else.

Maybe i should get a Motorola....

 

Maybe you should. My Q works flawlessly. It even plays the ringer from the phone when it rings. I am very happy with the Q and ecstatic that the bluetooth functions so well.

 

Do you get voice prompts from the D3 with the Q when trying to use voice dialing (eg "Say a command")? Does the caller ID function work properly. My Q works great except for these two functions. Bluetooth audio even works, although you can't control it from the D3.

No i do not get Caller ID other than the number calling! no names. Another annoying thing is that when i get a txt message the D3 just rings and rings until you do something about it.

Have you guys noticed how neat the display is when you use the built in player on the AVIC D3? it actually build a very useful Menu of songs on that disc

 

I actually purchased the IPBUS CD Changer thinking that the Auto text functionality would be the same but it is not. Do you guys know of any DVD or CD changers that would do just that? no i'm not buying an IPOD.

Trust me. Before the D3 I was about as anti-ipod as one could get.

But having dozens of music videos, movies, thousands of songs..all in a tiny Ipod..controlled by the D3..is incredible.

I'd rethink the Ipod decision if I were you.

Good luck

Thanks for the advise. I actually seriously considering it. but for now. I think the Changer should display the information the right way on the D3. That kinda says that the different design division from pioneer do not communicate very well.