gshadow325

bypass done today, delivered the car already.

this what was done to a 09 tundra

avic-x910bt

no speed pulse connection

grounded parking brake

pins swapped just like the avic-f900bt

works like a charm. tested with a 10 mile loop with speeds up to 60ish mph

Long time lurker, i am glad i can contribute back to avic411 with the following info.

Doing a install today in a 08 Toyota Tundra with a avic-x910bt.

The bypass for video is the same thing as the bypass for the AVIC-F900bt. same pin swap, same grounding of the parking brake. i did a 10 mile loop with speeds up to 60 MPH and video stayed playing.

I did not connect the speed pulse.

I did ground the green wire.

i did swap the yellow black to the same empty pin location as the AVIC-F900bt.

If anyone else can confirm this method to work please please chime in. I would hate to pass along bad info!!

this just so classic, karma is a muther f*cker

the wire mentioned above may not always be there!

here is a sure way to get it.

get to the cluster, strip a wire back and goto the pin #6, it will be empty. plug a wire in there and the VSS will be working!!