bluzr2

DODGE, RAM PICKUP, 2004, Speed Sense

 

The PCM is on the passenger side firewall.

 

dk. green/yellow .....PCM, top black plug, pin 13 .......

 

(On diesel models, the vss wire is at the ECM on the lower driver side of the engine, 50 pin plug, pin 11.)

 

-------------

sorry i dont see the reverse wire.. sure someone will chime in with it

dammit i saw the post on the main page didnt think to look what section it was in...im a noob

but if his unit was reinstalled into a different vehice clearing the gps memory may be another step to try if the brain is mounted correctly.

 

ok ill go back to my forum now.

I dont have a brain...LOL

no really i have a D1, not sure what unit he^ has but i have tried setting the installation angles in the menus with no success. now that i think of it the truck i took it out of was parked at a 45* angle of the one I installed it in..hmmm bet it still thinks its installed in the other one, i will try erasing the gps memory(think i saw an option for this)

just wondering did the original poster take the unit out of one car and install in another??

listening...

also having the same problem, never happened in either of the other cars i had my D1 installed in. not a big deal just wondering the cause

cntrylvr79, thank you sir! got it working... when i get the dash all figured out ill put up some pics also..

thanks again guys

damn i was definately hoping you had the infinity ive been hearing ppl saying you have to rerun all the wires to the speakers, others say all you have to do is hook up a remote wire(fingers crossed). also it looks like you are using a trim ring, is that the one that came with the avic or is it an aftermarket install kit of some sort? do you happen to have a pic of what you had to cut behind the dash to get the radit to fit? sorry for all the questions, ive been researching the install for like a week and i have finally decided to just do it..

 

ooh wanna share where you found the better deal on the backup camera??

thanks again Patrick

looks great so far!!! I am going to start installing mine tomorrow morning in my 2003 quad cab ram. couple questions if you dont mind, do you have the infinity sound system and did that create any problems(i'm assuming your using the rest of the stock system). were you able to find the sheet of abs plastic locally or did you have to order it? i was kind of hoping i can find it at like home depot or someplace like that. Im planning on going about filling the gaps a lil differently.

 

please keep this thread updated with great pics like those they are going to help me alot! and i cant wait to see the finished product..

Patrick

quick note I found the reset button, thanks to pioneers online manuals :)
if anybody serches for this it is located just above and to the left of the joystick on the D1

[quote name="ohlarikd"]When you change the boot screen, don't forget to press RESET after you put the DVD in, otherwise it won't load the new bootscreen image into memory.

Derek[/quote]

ok i made a DVD-rw with the new .PIM backgrounds i wanted and replaced the BGOPEN2 file with the loading screen i want. backgrounds work very good but where is this reset button on the D1? once i figure out how to get this navi loading screen to work its off to buy so dL DVDS :P any help is appreciated!

oh i tried the restore to factory defaults button(didnt work)
thanks again Patrick