avicpyro

On 5/7/2018 at 5:40 PM, 88MikeCoop said:

Tried this for about a week now on my AVH-4000NEX. I can easily navigate to the Initialize Factory Reset, it gives the OK on all section except GPS, Turns Blue and says to turn off power to test Bluetooth. After I remove the USB and restart, same old password screen.

Apologies but im not familiar with that part of these, total noob aside from what i've read and the little success  i've had here. but if the issue is related to GPS. is there anything physically that may be missing with that part?

On 4/25/2018 at 8:06 PM, HouZanShi87 said:

What firmware are you on? I upgraded to firm 1.10 before this happened. I've been driving around with the files on a 2 GB flash drive for the past few days. Not a single thing has happened.

i'm on firmware 1.03 i think. definitely not the latest...

On 5/4/2018 at 6:37 AM, paulo andre said:

hi

the img files are winzip,is necessary to unzip?

thanks

files used rar so i used winrar to extract as OP mentioned.

i also made sure the flash drive was clean of anything else. i used a 1GB flash drive i had lying around....

I searched, the AVIC Development Mod says its possible, wondering if anyone has done it?

is it just software? and/or also hardware?

Thank you.

it took less than 30 secs and it restarted by itself into the service mode.

i used the contents of rar provided in the OP.  formatted the stick to fat32 (not quick format) and it just worked.

make sure to use USB 1. or the first USB. not the 2nd.

Thank You. works on a avh-4100nex!