there were two parts to the cal, the first one you have to trace the outside border of the screen (white box) to set the parameters, then you do the touchscreen part, this is where i was confused. you have to keep pressing the square that pops up, then it will eventually move, then keep pressing it at its new location. i did this and it works fine. mine was off about a 1/2 inch before and i wasnt able to use the far left letters like "a"
I have the same issue in reverse... keys on the left of screen are correct, key press for right side is off of the screen. I can get into the calibration screen, drew out the lines on the screen (Step 1) and attempted adjust (step 2) - Question: Do I hold the press on the touch screen calibration square, or press repeatedly? How long / how many times do I press? Any help is appreciated.
touch screen calibration?? is there a setting?
in Problems/Troubleshooting
Posted
I have the same issue in reverse... keys on the left of screen are correct, key press for right side is off of the screen. I can get into the calibration screen, drew out the lines on the screen (Step 1) and attempted adjust (step 2) - Question: Do I hold the press on the touch screen calibration square, or press repeatedly? How long / how many times do I press? Any help is appreciated.
Thanks!