kingbird72
-
Content Count
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by kingbird72
-
-
RonS, I'm using a 4GB SD card, correctly formatted using FAT32 with default cluster size, I'm running PC and unzipped the downloaded which leaves me with files name Pioneer_T1000-25818. I did have to enter password to extract the zip file downloaded from zip supplied by nezfotnemom, which is a US/CAN map I believe and the Cardinfo should cover X9310BT. I'm going to unzip the entire file again just to make sure, and give it a try. When I insert the SD card after the installing the short version of the shortfuse hack, the system did not ask me for any password, instead it just says " Wrong SD, insert correct SD card". Thank you for your assistance.
-
RonS, I've tried the shortfuse easy version on my X9310BT running V6.0, the installation went smooth without issue. I put the map update on a separate SD card which contained the 3 files Update, Firmware and Cardinfo,cif that came with the download, when I insert the map update SD, it says wrong SD card. I managed to use testmode to kick the unit out of update mode. I don't believe I have the right Cardinfo.cif, and now I'm stuck as the Cardinfo.cif I've used came as part of the download zip, any ideas please.
-
RonS, thank you very much. I will try out the ShortFuse hack and see if I can get my unit to update, I'm currently running V6.0 on my X9310BT
-
RonS, I actually have a X9310BT and through the 2016 upgrade I updated the unit to X940BT. I've followed the instructions after reading the forum, and at first I did not play with the files at all, all I did was placed the 3 files onto the root of a 4GB SD card, but the machine will not go into update mode. I'm not that savvy when it comes to the Testmode so I didn't try the hack. I guess I will have to wait....
-
Tried a different CARDINFO.cif file from my 2015 update, and it does take me to update but asking for a password which I don't have, any help will be much appreciated.
-
I'm trying to update my X940BT, after downloading the update I simply unzip all the files and place them into the root of the SD card, which was formatted to FAT32, the SD card had these 3 files Firmware, Update and CARDINFO.cif. The unit will not initiate the update!!! any thoughts??
-
Too bad this won't work on my X930BT!!!
-
I can confirm this worked for my X9310BT, now the unit runs on firmware 6.0!!! I would like to once again thank you all for the contribution having waited 2 years to finally update the unit. A donation will be made!!!
-
it does work for X940Bt as well
-
I would like to thank you for uploading the maps, I was able to upgrade my Subaru X9310BT following your instructions without any issue.
-
If you download and read the update owner's manual from navigation.com. It tells you the model that's been updated which includes X9310BT, and what's been updated.
-
That's what I don't agree with, as a consumer purchsing a brand new product from Pioneer, they should offer the newest update of the map. I do understand the product might have been sitting there for awhile, and what Pioneer should really do it's to offer the customer a one time free update to the newest map with a coupon or something like that. Now having to spend $600 or more on a unit, on top of that another $120 for the update just doesn't seem right to me.
-
my question is, if I purchase the new update 2013 map directly from Navteq, would I be able to update the map since I've changed it to a different firmware??? I'm running X940BT 4.0 firmware instead of the original 3.01
-
Anyone can provide with the 2013 US/Canada map update for the X930BT!!!!
-
Good day everyone, I'm still pretty new to this forum and have been reading most of the postings. Back in July 2013 I got the factory Subaru installed X9310BT, yesterday I updated the firmware to 4.0 from 3.01. everything works as it should, however I screwed up my map as I installed 2012 map which it's older than what I had in the system... my question is, if I purchase the new update 2013 map directly from Navteq, would I be able to update the map since I've changed it to a different firmware.
Thanks for your input
-
did you ever find a way to downgrade???
-
Thank you very much for all the informations, I've updated my X9310BT (Factory 2013 Subaru unit in Canada) to the new map from 3.01 to 4.0, I do have to say it's pretty simple to do once I've downloaded the package. Please keep up the good work!!!
2017 v7 US/Can Update available for Z110/120/130/140,X920/930/940
in Hacks/Mods
Posted
RonS, It's working now, after I unzipped the files again, and reformatted the SD card again, now the unit it's updating as we speak!!! should be done within 30 minutes!!! Thank you Sir!!!