stx2006 Posted December 27, 2007 Report Share Posted December 27, 2007 Does anyone have a pic of their D3 installed in a 06 f-150? Or the new body style of the f150? I don't think mine is sitting in there right since theres a nice gap around the unit even after I put the trim piece in there. Quote Link to post Share on other sites
stx2006 Posted December 27, 2007 Author Report Share Posted December 27, 2007 Here's what mine looks like... It looks like it's sitting to far back??? [/img] Quote Link to post Share on other sites
ibeb Posted December 27, 2007 Report Share Posted December 27, 2007 your pic didn't show up, but from the sounds of it you may be using the wrong holes on the mounting bracket and/or deck which could explain the spacing that you are getting. mine sits in just perfect and I also tucked the xm module under the center dash tray. tried to find you a good pic of mine, but couldn't and it's too dark outside now to. if you have any questions let me know. erik Quote Link to post Share on other sites
stx2006 Posted December 27, 2007 Author Report Share Posted December 27, 2007 your pic didn't show up, but from the sounds of it you may be using the wrong holes on the mounting bracket and/or deck which could explain the spacing that you are getting. mine sits in just perfect and I also tucked the xm module under the center dash tray. tried to find you a good pic of mine, but couldn't and it's too dark outside now to. if you have any questions let me know. erik http://img401.imageshack.us/img401/7101 ... 32aec9.jpg I could be using the wrong holes. I'll check it after work since I'm going to wire in the VSS also. Quote Link to post Share on other sites
cntrylvr79 Posted December 27, 2007 Report Share Posted December 27, 2007 the dash kit should have come with 1/4" plastic spacers for each of the mounting holes. You'll need those. If it didn't then you're going have have to get some from a hardware store and stick them onto the dash kit. Quote Link to post Share on other sites
stx2006 Posted December 27, 2007 Author Report Share Posted December 27, 2007 the dash kit should have come with 1/4" plastic spacers for each of the mounting holes. You'll need those. If it didn't then you're going have have to get some from a hardware store and stick them onto the dash kit. only thing I got dealing with mounting it was two types of mounts. one is taller then the other.. and two dash covers... which I have no clue why... Quote Link to post Share on other sites
TeckBargins Posted December 28, 2007 Report Share Posted December 28, 2007 Does anyone have a pic of their D3 installed in a 06 f-150? Or the new body style of the f150? I don't think mine is sitting in there right since theres a nice gap around the unit even after I put the trim piece in there. Should look like this depending on kit. Quote Link to post Share on other sites
stx2006 Posted December 28, 2007 Author Report Share Posted December 28, 2007 umm.. I have the trim around mine like urs. But the bottom sticks out... I guess I just need to play with it some more to see what Im doing wrong. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.