laserbluep5 Posted January 8, 2008 Report Share Posted January 8, 2008 I've been wondering if it is possible to switch out the Z1's HDD with the Z2. If so is there a kind of reset that has to be performed or do I just switch them out and start it back up. I have One laying around from a client that got in a pretty severe accident. Thanks Ian Quote Link to post Share on other sites
bdmpastx Posted January 8, 2008 Report Share Posted January 8, 2008 No reset needed, just swap and go...the unit with say updating and bam, you are good to go. Quote Link to post Share on other sites
laserbluep5 Posted January 8, 2008 Author Report Share Posted January 8, 2008 Thanks will try this later today!!! Quote Link to post Share on other sites
laserbluep5 Posted January 8, 2008 Author Report Share Posted January 8, 2008 tried switching out the hdds it say its a unreadable hdd. you sure that it's as easy as you say. By the way i'm in montreal Canada, is there a possibility that canadian models are different? Quote Link to post Share on other sites
inferno999 Posted January 8, 2008 Report Share Posted January 8, 2008 The drive is locked to that unit. You can follow the steps in the Z1 to Z2 upgrade guide to unlock and remove security on your drive. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.