Planning to install a avic z1 for 06 Pilot

[tillithz]

new here and reading as much as possible but I have seen a little confusion on suggested products for the thread starter. as far as the stock sub and what to use for it with the z1 you can use ANY 2 ohm stable amp (if the stock sub is 2 ohms) as far as the other poster saying it cant handle much before sounding like crap, that isnt necessarily the power that is causing the sub to sound poor. There should be gain controls and possibly a crossover to dial in just what the sub can handle. 99.999999% of blown speakers are not because the operator sent too much power to the speaker but sent a dirty or improper signal, like bass to a tweeter and ran it for some time. I dont believe I have ever seen a blown speaker due to too much power. hopefully this will help you locate a compatible amp even if it is a bit overdone in the power specs.