firedawgs Posted June 8, 2008 Report Share Posted June 8, 2008 I installed all the adapter today for my Pioneer AVIC-D3. The following are the adapter: GMOS-04 SW1-PS CD-BTB200- Blue tooth adapter CD-1200 - Ipod apadter Boyo VTL420 - Liscense Plate camera So here are my issues: 1. Boyo VTL420 Will not show video. I ran the wires correct. I have a multi-meter, and it shows power and ground up to the front; along with video. [my guess is that the camera is bad] 2. Ipod connect (CD-1200) All it does is charge the Ipod, it does not play, pause, skip, or do anything else in Ipod mode. 3. SW1-PS (steering wheel control). Ran the wire and program under #1 fine. The programing works when the vehicle is on, then when the vehicle is off, but power is still on (before you open the door) it scan through the preset radio buttons non-stop What is the problem or fix? Can anyone help please???? Quote Link to post Share on other sites
madsonp Posted June 8, 2008 Report Share Posted June 8, 2008 I installed all the adapter today for my Pioneer AVIC-D3. The following are the adapter: GMOS-04 SW1-PS CD-BTB200- Blue tooth adapter CD-1200 - Ipod apadter Boyo VTL420 - Liscense Plate camera So here are my issues: 1. Boyo VTL420 Will not show video. I ran the wires correct. I have a multi-meter, and it shows power and ground up to the front; along with video. [my guess is that the camera is bad] 2. Ipod connect (CD-1200) All it does is charge the Ipod, it does not play, pause, skip, or do anything else in Ipod mode. 3. SW1-PS (steering wheel control). Ran the wire and program under #1 fine. The programing works when the vehicle is on, then when the vehicle is off, but power is still on (before you open the door) it scan through the preset radio buttons non-stop What is the problem or fix? Can anyone help please???? 1) You have to turn your camera on in the settings menu. 2) What type of ipod do you have ? Quote Link to post Share on other sites
firedawgs Posted June 9, 2008 Author Report Share Posted June 9, 2008 Yes, I turned on the camera in the setup menu. The monitor is switching over when in reverse, but no feed from the camera. The Ipod I have is the Ipod mini (2nd generation). Quote Link to post Share on other sites
firedawgs Posted June 9, 2008 Author Report Share Posted June 9, 2008 I just looked. It seems that my Ipod is too old? The CD-1200 only works on the 3rd-5th generation. Quote Link to post Share on other sites
madsonp Posted June 9, 2008 Report Share Posted June 9, 2008 Are you sure you connected your camera to the right RCA input? Quote Link to post Share on other sites
firedawgs Posted July 21, 2008 Author Report Share Posted July 21, 2008 It turned out the the camera unit was bad. I now have the new one in and it works awesome. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.