kouger Posted July 5, 2008 Report Share Posted July 5, 2008 Hi all I need some help please. I have the Z2 hooked up. Just got the PAC SWIPS to connect to the Z2 - I have an o6 Sonata. Connected the PAC up but cannot get into programming mode to set the steering wheel controls. Any ideas. I have double checked my wiring. Have the red from the PAC going to switched positive. Have the black grounded. The white going to pin 18 just like the instructions say. I turn the key on while holding the button on the pac, then release the button, press and release 9 times to get the correct setting. Turn the key off and then on again, hit the button on the PAC unit but the LED just turns off when I release the button, should it not stay on so that I can program my steering wheel remote? Please help. Thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.