jocooter Posted September 3, 2008 Report Share Posted September 3, 2008 Uses the same workaround as the N4 did. Correction, N5 is now blocking dvd playback. Quote Link to post Share on other sites
jocooter Posted September 5, 2008 Author Report Share Posted September 5, 2008 And knows the parking brake is not hooked up correct Quote Link to post Share on other sites
TypeS Posted September 6, 2008 Report Share Posted September 6, 2008 Just wait, I am sure someone will figure out how to bypass the system. Anyone try the N4 two wire trick yet? Quote Link to post Share on other sites
jocooter Posted September 11, 2008 Author Report Share Posted September 11, 2008 Anyone have any thoughts Quote Link to post Share on other sites
gibster786 Posted September 23, 2008 Report Share Posted September 23, 2008 Bypassing the N5 is just like bypassing the N2. Pull the sticker back on the actual flip out unit and solder the 2 pins. i cant remember the pin numbers put they are they only two points you can see under the big pioneer sticker with the bar code and serial number. after soldering the two pins just ground the green wire. i have done this a few times as I am an installer. Quote Link to post Share on other sites
Solicit619 Posted September 28, 2008 Report Share Posted September 28, 2008 I JUST BOUGHT THE AVIC-N5 & I WILL DO THIS MYSELF BUT I SAW IN THE PHOTO EXPLANATION OF THE AVIC-N2 Bypass That IF YOU SLIP A BIT YOU WILL RUIN YOUR UNIT?? IS THIS THE EXACT WAY TO DO IT?? Quote Link to post Share on other sites
Solicit619 Posted September 28, 2008 Report Share Posted September 28, 2008 http://www.avic411.com/forum/viewtopic. ... cn2+bypass HERE IS THE LINK! Is This the EXACT Way To do the AVIC-N5?? Quote Link to post Share on other sites
mshz Posted October 11, 2008 Report Share Posted October 11, 2008 i just saw some one figure it out on ebay, here is link http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=230299775737 Quote Link to post Share on other sites
mshz Posted October 11, 2008 Report Share Posted October 11, 2008 i just saw some one figure it out on ebay, here is link http://cgi.ebay.ca/ws/eBayISAPI.dll?Vie ... 0299775737 Quote Link to post Share on other sites
CamelTowing Posted October 11, 2008 Report Share Posted October 11, 2008 Its the same as the N4 bypass!!! Why pay for information that is on here for free? http://www.avic411.com/forum/viewtopic.php?t=10089 Quote Link to post Share on other sites
mshz Posted October 12, 2008 Report Share Posted October 12, 2008 Its the same as the N4 bypass!!! Why pay for information that is on here for free? http://www.avic411.com/forum/viewtopic.php?t=10089 has some one tested this this work the same way Quote Link to post Share on other sites
tim@sp Posted October 13, 2008 Report Share Posted October 13, 2008 I am getting my N5 in a day or 2... I will try the N4 bypass first and let you all know if it works after a few days. Tim Quote Link to post Share on other sites
mshz Posted October 14, 2008 Report Share Posted October 14, 2008 i will wait for ur reply thank any way Quote Link to post Share on other sites
tim@sp Posted October 15, 2008 Report Share Posted October 15, 2008 I installed the Unit using the N4 type bypass and it works so far... I then disconected the wire that I put in the harness location Just to see if there was a change, and It quit working... hooked it back up and all is well! I will try it for a few days and let you know if it keeps working! Quote Link to post Share on other sites
mshz Posted October 15, 2008 Report Share Posted October 15, 2008 Thanks a Lot it great effort from u Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.