djoker04 Posted October 3, 2006 Report Share Posted October 3, 2006 Any one here install a Dbl Din in a Armada? What type of brackets did you use. I tried to use the oem L brackets but it raises the sys to high. I have the Scosche install bezel and know I have to do some trimming if I wnt to use the DBL DIN shroud and attach it to the bezel. I want to use some L brackets and don't know where to find some multi hole l brackets. Any help would be appreciated. Thanks K Quote Link to post Share on other sites
cntrylvr79 Posted October 3, 2006 Report Share Posted October 3, 2006 Have you tried drilling new holes in the factory brackets a bit lower to make it fit properly. Quote Link to post Share on other sites
djoker04 Posted October 3, 2006 Author Report Share Posted October 3, 2006 [quote name="cntrylvr79"]Have you tried drilling new holes in the factory brackets a bit lower to make it fit properly.[/quote] Brah You are psychic. I was thinking thr same thing just want to try diff ways before going that way. Plus I ned to get something to make sure I'm even on both sides. Accuracy is not my best skill. Thanks K Quote Link to post Share on other sites
cntrylvr79 Posted October 3, 2006 Report Share Posted October 3, 2006 All I can say is measure. that an use a 1/4" drill bit to make the holes. It'll give you a little bit of play this way if you're a lit bit off you can shift the brackets a tad. By the way not psychic, just psychotic. :twisted: Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.