oakcliffralf Posted February 12, 2009 Report Share Posted February 12, 2009 I was wondering if anyone might know how to set the unit, so that the bass in my stock speakers is completely off but not the one in my subwoofer. Quote Link to post Share on other sites
One Bad Stang Posted February 12, 2009 Report Share Posted February 12, 2009 go into you equalizer selection screen and select one of the custom eq's and push "customize". then adjust everything how you want it with the low end all the way down if thats what you want. then go to the a/v sound settings screen and adjust the subwoofer level and frequency. its all in the opperators manual if that doesnt make any sense. Quote Link to post Share on other sites
skicrave Posted February 12, 2009 Report Share Posted February 12, 2009 Don't use the parametric EQ for this. If your speakers are running on deck power go to A/V settings, and set the low-pass filter to it's highest setting. That will filter out low frequencies that are going to your speakers, but will not effect the sub preouts. If you're using an amp for your speakers, set the low-pass filter using the amps onboard crossover network. Quote Link to post Share on other sites
oakcliffralf Posted February 12, 2009 Author Report Share Posted February 12, 2009 thanks a lot imma go try it right now Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.