fla4runner Posted April 5, 2009 Report Share Posted April 5, 2009 Hello all, I recently purchased the f90BT and the GEX-P920XM XM satellite module. Yesterday I took it upon myself to install the entire setup myself including the XM. Everything with the install went nicely with no major issues during setup. The problem: When I switch the source to XM I am able to browse and see the information for all channels but I cannot hear any audio from any of the XM channels???? I know the satellite connection and antenna are working because the unit did sync with XM and download all of the stations and does say ON THE AIR for each station; I just cannot hear any audio, ONLY through XM. FM, AM, iPOD, DVD , CD all work correctly and the audio sounds great. - I thought the GEX-P920XM XM module may have been bad so I already replaced it for a brand new one -- same results. - I also reset the XM module by pressing the pin size hole -- same results. Any ideas / suggestions would be appreciated. Quote Link to post Share on other sites
rareform Posted April 6, 2009 Report Share Posted April 6, 2009 plug the ip bus cable into the other port on the gex920xm. Quote Link to post Share on other sites
doogie Posted April 6, 2009 Report Share Posted April 6, 2009 don't worry..i beat my head against the wall on this too.. Quote Link to post Share on other sites
fla4runner Posted April 6, 2009 Author Report Share Posted April 6, 2009 Thanks! That did the trick. I guess my technically inclined mind was thinking "IP BUS IN" from the view of the Pioneer deck inputing into the XM -- silly mistake on my end. Very happy I don' t have to rip the head unit back out Thanks again for the help! Quote Link to post Share on other sites
rareform Posted April 6, 2009 Report Share Posted April 6, 2009 Yep think we have all done that at some point or another. Glad to help... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.