dickoa84 Posted August 3, 2009 Report Share Posted August 3, 2009 Could some one please help i have by mistake of removed all the pre outs fron the plug as i didnt think i required them and it was becoming a pain to fit the unit. Now i realise i need the Aux Input (red and white) connected into the plug to run my iphone for music. Silly me i didnt mark done where the pins came from on the plug. On the white lead i have a black and white wire with two pins and on the red i have a pink and a black wire with two pins could someone please post a picture or just the pin locations i rang pioneer and they siad they wont help. Just to be clear its the plug which fits into the back of the unit the one with the mute wire and pre outs on it On another subject everytime i go into phone on the unit it reboots this has started happening since i tryed to pair my iphone 2g does anyone have a link for a quick fix for this issue i tried a flash disk delete and reinstall but no luck please help Thanks Alot Quote Link to post Share on other sites
1loudls Posted August 3, 2009 Report Share Posted August 3, 2009 sorry no pics look at the empty harness like it was plugged into the avic and the wires are comming out toward you and the plug release is on the top top row pin number 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 13,14,15,16,17,18,19,20,21,22,23,24 bottom row pin number # = pin number, what the tag says, (what color the plug is) polarity (what color the pin wire is) top row 1 mute wire orignal location 2 rear output right (red) positive (pink) 3 rear output left (white) positive (white) 4 front output right (red) positive (pink) 5 front output left (white) positive (white) 6 subwoofer right (red) positive (pink) 7 subwoofer left (white) positive (white) 8 audio input right (red) positive (pink) 9 audio input left (red) positive (white) 10 video input (yellow) positive (red) 11 empty 12 rear view camera in (brown) positive (red) bottom row 13 empty 14 empty 15 rear output common signal ground (black) 16 empty orignally--- new mute wire location for hardware bypass 17 front output common signal ground (black) 18 system remote control (blue/white) 19 subwoofer output common signal ground (black) 20 audio input right (red) signal ground (black) 21 audio input left (white) signal ground (black) 22 video input (yellow) signal ground (black) 23 empty 24 rear view camera in (brown) signal ground (black) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.