kevin199 Posted September 26, 2009 Report Share Posted September 26, 2009 I changed the data.zip the barking brake speed from 16.0 to 128.0. I saved it and copied it into the folder! But it did not work!! Does somebody had the same problem or know the answer? Does it fix that i can do settings, navigation and watch dvd while driving?? Thx Kevin199 Quote Link to post Share on other sites
viper62 Posted September 28, 2009 Report Share Posted September 28, 2009 Did you ground the e-brake wire? Quote Link to post Share on other sites
kevin199 Posted September 28, 2009 Author Report Share Posted September 28, 2009 I think!! The radio was in the car when i bought it!!! What is the colour of the wire?? Quote Link to post Share on other sites
1loudls Posted September 28, 2009 Report Share Posted September 28, 2009 light green, and long as hell Quote Link to post Share on other sites
joegr Posted September 28, 2009 Report Share Posted September 28, 2009 At 128, you will still get a warning and lock-out if you hit 80 MPH. I'd set it higher, say 250 or 300. Quote Link to post Share on other sites
kevin199 Posted September 29, 2009 Author Report Share Posted September 29, 2009 I made a photo Is one of the two the wire??? Quote Link to post Share on other sites
joegr Posted September 29, 2009 Report Share Posted September 29, 2009 No, don't ground the wire at your car's parking brake. If you do, then you will get a brake waring all the time. You need to pull the AVIC out, disconnect or cut the light green wire coming from the black connector on the AVIC, and then ground that wire. (Ground the end of the wire that is still attached to the AVIC connector, not the end to goes somewhere into the dash of your car.) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.