supra2k6 Posted December 29, 2009 Report Share Posted December 29, 2009 so i bought this f700bt used from a friend he had it for a couple months on his car, right after buying it i got into a car accident and between work school and trying to get a new car, six months went by and the unit was sitting in my room on a table. I decided to install it today wired it up according to the manual did the wire bypass and grounded both the mute and the e-brake cable once i put everything back together i started the car and the fan turns on the buttons light up white but the screen stays BLACK. i pressed reset and nothing. After the white buttons come on they go out after 20seconds and evrythings stays black? this was working? i called pioneer first thing they asked me was did u do the bypass? i said no then he didn't offer any other support just told me the unit is broken. are there any resets i can try or something else i am over looking? thanks Quote Link to post Share on other sites
madsonp Posted December 31, 2009 Report Share Posted December 31, 2009 Did you relocate the mute wire to the correct pin ? Quote Link to post Share on other sites
supra2k6 Posted December 31, 2009 Author Report Share Posted December 31, 2009 i bought the cable from ebay and it came bypassed alrdy i looked at the pictures and mine was alrdy moved. do u think i should move it back? t thanks Quote Link to post Share on other sites
madsonp Posted January 1, 2010 Report Share Posted January 1, 2010 No, just make sure it's in the correct location and secured well when it's plugged in. Other than that I don't know what to tell you. It's almost sounding like you have a bad unit. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.